Filter
Top Products
Leveling Flex Frame
The second pivot point is where the telescopic arms connect to the mowers. Each deck
has two pins, one in the front and one in the rear, nested between two stamped plates
with large slots. The plates are attached to each of the frame arms with three bolts. As
the mower floats over the ground, the slots allow it to follow the ground contour without
interference (see fig. 9).
It is best to make leveling adjustments with the tractor and mower on flat ground. Lower
all three mowing decks ensuring the hydraulic pressure from the tractor is completely
released.
OPERATION 23 FRONTIER
F
LEX WING GROOMING MOWERS OPERATOR’S MANUAL
Fig. 10 - Central mowing unit.
Fig. 11 - Central mowing unit.
stamped plate
telescopic arm
pivot pin
hydraulic cylinder
wheel arm
locking hook