Filter
Top Products
15
Multipurpose Bucket
with Bolt-on Teeth 655C-II 755C-II
Capacity heaped (ISO 7546)................................2.1 cu. yd. (1.6 m
3
) 2.6 cu. yd. (2.0 m
3
)
Breakout force ....................................................24,525 lb. (11 120 kg) 35,283 lb. (16 000 kg)
Static tipping load ...............................................21,226 lb. (9628 kg) 27,684 lb. (12 555 kg)
Maximum clamping force....................................19,147 lb. (8680 kg) 22,473 lb. (10 190 kg)
D Overall length (with bucket).................................247 in. (6275 mm) 273 in. (6938 mm)
G Dumping height at 45 degrees – bucket .............107 in. (2716 mm) 118 in. (2997 mm)
G
1
Dumping height at 45 degrees – blade ...............128 in. (3252 mm) 141 in. (3574 mm)
H Reach at 45 degrees – bucket ............................44 in. (1114 mm) 46 in. (1180 mm)
H
1
Reach at 45 degrees – blade ..............................25 in. (629 mm) 26 in. (656 mm)
I Maximum digging depth below grade .................7.1 in. (180 mm) 8.3 in. (212 mm)
J Maximum operating height – bucket open ..........217 in. (5509 mm) 238 in. (6044 mm)
J
1
Maximum operating height – bucket closed........193 in. (4896 mm) 214 in. (5424 mm)
K Maximum height of hinge pin..............................144 in. (3662 mm) 159 in. (4040 mm)
L Height of hinge pin, transport position.................20 in. (503 mm) 22 in. (567 mm)
M Width of bucket...................................................96 in. (2445 mm) 98 in. (2500 mm)
N Width of opening.................................................48 in. (1215 mm) 51 in. (1285 mm)
Three-Shank Rigid-Type Radial Ripper with ESCO Ripper Tips
Weight ................................................................1,742 lb. (790 kg)
✶
2,359 lb. (1070 kg)
✶✶
O Ground clearance below toolbar..........................6.5 in. (166 mm) 7.9 in. (200 mm)
P Ripping width......................................................69 in. (1760 mm) 73 in. (1860 mm)
Q Toolbar width......................................................79 in. (1996 mm) 83 in. (2100 mm)
R Lifting height.......................................................28 in. (712 mm) 30 in. (771 mm)
S Ripping depth......................................................14 in. (352 mm) 15 in. (385 mm)
T Additional overall length – raised ........................27 in. (676 mm) 26 in. (660 mm)
T
1
Additional overall length – lowered .....................29 in. (729 mm) 25 in. (635 mm)
U Distance between teeth.......................................33 in. (850 mm) 35 in. (900 mm)
V Angle ..................................................................21 degrees 21 degrees
✶
When mounting the 655C ripper, the rear 550-lb. (250 kg) counterweight must be removed. Net machine weight change is 1,215 lb. (541 kg).
✶✶
When mounting the 755C ripper, the rear 550-lb. (250 kg) and underside 2,205-lb. (1000 kg) counterweights must be removed. Net machine weight change is – 157 lb.
(– 71 kg).
N
H
1
H
J
J
1
K
G
G
1
L
I
O
V
R
S
T
T
1
U
P
Q
D
57°
45°
50°
52°
40°
15°
655C / 755C SERIES II LOADERS WITH MULTIPURPOSE BUCKETS AND
THREE-SHANK RIGID-TYPE RADIAL RIPPERS WITH ESCO RIPPER TIPS