Filter
Top Products
14
Dimensions 655C-II 755C-II
Rounded to the nearest whole number.
A Height over cab (including grousers) ...................123 in. (3129 mm) 130 in. (3304 mm)
B Height over exhaust pipe.....................................122 in. (3092 mm) 125 in. (3186 mm)
C Length to front of track .......................................171 in. (4339 mm) 189 in. (4801 mm)
D Overall length (with bucket).................................241 in. (6132 mm) 269 in. (6832 mm)
E Track gauge........................................................66 in. (1680 mm) 71 in. (1800 mm)
F Ground clearance................................................15.6 in. (395 mm) 16.8 in. (426 mm)
Standard Bucket with Bolt-on Teeth
Capacity heaped (ISO 7546)................................2.35 cu. yd. (1.8 m
3
) 3.14 cu. yd. (2.4 m
3
)
Breakout force ....................................................27,675 lb. (12 550 kg) 37,080 lb. (16 820 kg)
Static tipping load ...............................................23,086 lb. (10 470 kg) 30,418 lb. (13 795 kg)
G Dumping height at 45 degrees............................111 in. (2827 mm) 121 in. (3085 mm)
H Reach at 45 degrees...........................................42 in. (1072 mm) 47 in. (1192 mm)
I Maximum digging depth below grade .................5.2 in. (132 mm) 5.6 in. (142 mm)
J Maximum operating height..................................197 in. (5000 mm) 217 in. (5505 mm)
K Maximum height of hinge pin..............................144 in. (3662 mm) 159 in. (4040 mm)
L Height of hinge pin, transport position.................20 in. (503 mm) 23 in. (573 mm)
M Width of bucket...................................................96 in. (2445 mm) 98 in. (2500 mm)
M
J
L
I
K
G
H
C
B
A
E
F
D
15°
40°
52°
50°
57°
45°
655C / 755C SERIES II LOADERS WITH STANDARD BUCKETS