Filter
Top Products
326D / 328D / 332D
18
19
Engine 326D 328D 332D
Manufacturer and Model John Deere PowerTech
TM
E 5030HT John Deere PowerTech E 5030HT John Deere PowerTech E 5030HT
Non-Road Emission Standards EPA Interim Tier 4/EU Stage IIIB EPA Tier 3/EU Stage IIIA EPA Tier 3/EU Stage IIIA
Cylinders 5 5 5
Net Peak Power (ISO 9249) 51.9 kW (70 hp) at 2,000 rpm 59.6 kW (80 hp) at 2,000 rpm 66.7 kW (89 hp) at 2,400 rpm
Gross Peak Power (ISO 14396) 55.1 kW (74 hp) at 2,800 rpm 63.4 kW (85 hp) at 2,200 rpm 71.1 kW (95 hp) at 2,400 rpm
Net Peak Torque 256 Nm (189 ft.-lb.) at 2,050 rpm 300 Nm (221 ft.-lb.) at 2,000 rpm 341 Nm (252 ft.-lb.) at 1,950 rpm
Displacement 3.0 L (186 cu. in.) 3.0 L (186 cu. in.) 3.0 L (186 cu. in.)
Rated Engine Speed 2,800 rpm 2,800 rpm 2,600 rpm
Net Torque Rise 36.0% at 1,400 rpm 43.0% at 1,700 rpm 36.9% at 1,680 rpm
Aspiration Turbocharged and intercooled Turbocharged and intercooled Turbocharged and intercooled
Air Cleaner Dry dual element Dry dual element Dry dual element
Cooling 326D / 328D / 332D
Fan Drive Variable-speed hydraulic drive
Powertrain 326D 328D 332D
Hydrostatic-servo control or electrohydraulic; four 100 HD heavy-duty chain, continuous loop
Single Speed 11.3 km/h (7.0 mph) 11.3 km/h (7.0 mph) 11.3 km/h (7.0 mph)
Two Speed, High 17.7 km/h (11.0 mph) 19.3 km/h (12.0 mph) 19.3 km/h (12.0 mph)
Axles Induction-hardened, one-piece forged axle shafts with maintenance-free oil-bath lubrication of inner
and outer axle bearings
Maximum Axle Torque 7725 Nm (5,680 lb.-ft.) 8480 Nm (6,235 lb.-ft.) 9289 Nm (6,830 lb.-ft.)
Tractive Effort 3958 kgf (8,725 lbf) 3905 kgf (8,610 lbf) 4218 kgf (9,300 lbf)
Final Drive Chains, high strength, adjustment free
Brakes Spring-applied, hydraulically released wet-disc park brake
Hydraulics
Standard Pump Flow 80 L/m (21 gpm) 80 L/m (21 gpm) 95 L/m (25 gpm)
Total Pump Flow with High-Flow Option 125 L/m (33 gpm) 132 L/m (35 gpm) 144 L/m (38 gpm)
System Pressure at Couplers 23 787 kPa (3,450 psi) 23 787 kPa (3,450 psi) 23 787 kPa (3,450 psi)
Hydraulic Horsepower
Standard Flow (calculated) 34 kW (46 hp) 34 kW (46 hp) 40 kW (53 hp)
High Flow (calculated) 54 kW (72 hp) 57 kW (77 hp) 61 kW (82 hp)
Cylinders 326D / 328D / 332D
John Deere heat-treated, chrome-plated, polished cylinder rods, hardened steel (replaceable bushings) pivot pins
Electrical
Voltage 12 volt
Battery Capacity 925 CCA
Alternator Rating 70 amp
Lights Halogen, 2 front and 1 rear standard
Operator’s Station
ROPS (ISO 3471)/FOPS (ISO 3449) structure with quick-pivot standard
Tires/Wheels 326D 328D 332D
Standard Tire Size 12 x 16.5 10 PR Extra Wall 14 x 17.5 12 PR Extra Wall 14 x 17.5 14 PR Hauler
Serviceability 326D / 328D / 332D
Rell Capacities
Fuel Tank 110.5 L (29.0 gal.)
Operating Weights 326D 328D 332D
Base Machine 3689 kg (8,125 lb.) 3814 kg (8,400 lb.) 4163 kg (9,170 lb.)