John Deere 180G LC Compact Loader User Manual


 
Swing Mechanism 180G LC
Speed 12.8 rpm
Torque 50 000 Nm (36,765 lb.-ft.)
Serviceability
Refill Capacities
Fuel Tank 320 L (84.5 gal.)
Cooling System 23.5 L (24.8 qt.)
Engine Oil with Filter 14.5 L (15 qt.)
Hydraulic Tank 125 L (33 gal.)
Hydraulic System 210 L (55.5 gal.)
Gearbox
Swing 6.2 L (6.6 qt.)
Propel (each) 6.8 L (7.2 qt.)
Pump Drive 0.9 L (1.0 qt.)
Operating Weights
With full fuel tank; 79-kg (175 lb.) operator; 1067-mm (42 in.), 0.83-m
3
(1.09 cu. yd.), 785-kg (1,731 lb.) general-purpose bucket; 3.21-m (10 ft. 6 in.) arm; 3910-kg (8,620 lb.)
counterweight; and 700-mm (28 in.) triple semi-grouser shoes
Operating Weight 20 120 kg (44,317 lb.)
Component Weights
Undercarriage with Triple Semi-
Grouser Shoes
600 mm (24 in.) 6752 kg (14,873 lb.)
700 mm (28 in.) 7143 kg (15,733 lb.)
800 mm (32 in.) 7437 kg (16,381 lb.)
One-Piece Boom (with arm cylinder) 1566 kg (3,449 lb.)
Arm with Bucket Cylinder and Linkage
2.71 m (8 ft. 10 in.) 881 kg (1,941 lb.)
3.21 m (10 ft. 6 in.) 946 kg (2,084 lb.)
Boom-Lift Cylinders (2), Total Weight 326 kg (718 lb.)
1067-mm (42 in.), 0.83-m
3
(1.09 cu. yd.)
Bucket
785 kg (1,731 lb.)
Counterweight, Standard 3910 kg (8,620 lb.)
Operating © imensions
Arm Length 2.71 m (8 ft. 10 in.) 3.21 m (10 ft. 6 in.)
Arm Digging Force
SAE 91 kN (20,496 lb.) 81 kN (18,240 lb.)
ISO 95 kN (21,282 lb.) 84 kN (18,825 lb.)
Bucket Digging Force
SAE 113 kN (25,311 lb.) 113 kN (25,311 lb.)
ISO 126 kN (28,244 lb.) 126 kN (28,244 lb.)
Lifting Capacity Over Front at Ground
Level 6.1-m (20 ft. 0 in.) Reach (with
power boost)
5287 kg (11,656 lb.) 5302 kg (11,690 lb.)
A Maximum Reach 9.43 m (30 ft. 11 in.) 9.94 m (32 ft. 7 in.)
A
|
Maximum Reach at Ground Level 9.27 m (30 ft. 5 in.) 9.79 m (32 ft. 1 in.)
B Maximum Digging Depth 6.57 m (21 ft. 7 in.) 7.07 m (23 ft. 2 in.)
B
|
Maximum Digging Depth at 2.44-m
(8 ft. 0 in.) Flat Bottom
6.32 m (20 ft. 9 in.) 6.87 m (22 ft. 6 in.)
C Maximum Cutting Height 9.40 m (30 ft. 10 in.) 9.79 m (32 ft. 1 in.)
© Maximum Dumping Height 6.57 m (21 ft. 7 in.) 6.93 m (22 ft. 9 in.)
E Minimum Swing Radius 3.13 m (10 ft. 3 in.) 3.13 m (10 ft. 3 in.)
F Maximum Vertical Wall 5.55 m (18 ft. 3 in.) 6.28 m (20 ft. 7 in.)
G Tail-Swing Radius 2.55 m (8 ft. 4 in.) 2.55 m (8 ft. 4 in.)
CENTERLINE OF SWING
A'
A
B'
B
D
C
F
G
GROUND LINE
E