Filter
Top Products
Specifications
Specifications
Specifications
PAGES
12–13
Engine 1050C Waste Handler
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Liebherr D 9406 TI-E A3 intercooled and turbocharged diesel; meets EPA and CARB emission non-road regulations
Engine power per ISO 9249 . . . . . . . . . . . . . 324 SAE net hp (242 kW) @ 1,800 rpm
Cylinders (wet sleeve). . . . . . . . . . . . . . . . . . V6
Displacement . . . . . . . . . . . . . . . . . . . . . . . . 793 cu. in. (13 L)
Fuel consumption, typical . . . . . . . . . . . . . . . 7.7 to 13.2 gal./hr. (29 to 50 L/h)
Maximum net torque . . . . . . . . . . . . . . . . . . 1,129 lb.-ft. (1530 Nm) @ 1,200 rpm
Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . pressure system with full-flow spin-on filter and integrated oil-to-water cooler
Air cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . dual stage dry type with safety element, aspirated precleaner, and restriction indicator light
Electrical system. . . . . . . . . . . . . . . . . . . . . . 24 volt with 80-amp alternator
Cooling system . . . . . . . . . . . . . . . . . . . . . . . 5-fin-per-in. radiator with auto-reversing thermostatically controlled hydrostatic blower fan
Cold-starting aid . . . . . . . . . . . . . . . . . . . . . . flame-glow intake air heater
Transmission
Dual-path, electronic-controlled, closed-loop hydrostatic drive; load-sensing feature automatically adjusts speed and power to match changing load conditions; each
individual track is powered by a variable displacement pump and motor combination; single lever controls speed and direction; ground speed (forward and reverse)
infinite to 6.8 mph (11 km/h); decelerator pedal permits speed reduction from 6.8 mph (11 km/h) to holding; three working ranges; maximum speed-range control
switch located in single-lever handle; maximum speed in range is selected by F-N-R lever position
Travel speeds (infinitely variable)
Forward Reverse
1st speed range . . . . . . . . . . . . . . . . 0 to 2.5 mph (0 to 4.0 km/h) 0 to 3.0 mph (0 to 4.8 km/h)
2nd speed range. . . . . . . . . . . . . . . . 0 to 4.0 mph (0 to 6.5 km/h) 0 to 4.8 mph (0 to 7.7 km/h)
3rd speed range . . . . . . . . . . . . . . . . 0 to 6.8 mph (0 to 11.0 km/h) 0 to 6.8 mph (0 to 11.0 km/h)
Final Drives
Heavy-duty, combination spur gear with double-reduction planetary final drives mounted independent of track frame and dozer push frame for isolation from shock
loads; the hydraulic drive motors are mounted to the mainframe; final drives are double sealed with electronic seal-integrity indicator and final drive seal guards
Steering
Fully modulated, infinitely variable, single-lever steering allows for full power turns and counterrotation; infinitely variable track speeds provide unlimited maneuver-
ability and optimum control; hydrostatic steering eliminates steering clutches and brakes
Brakes
Hydrostatic (dynamic) braking stops the machine whenever the direction-control lever is moved to neutral or whenever the combined decelerator/brake pedal is fully
depressed
Automatic Park Brake
Exclusive park brake feature engages wet, multiple-disc brakes whenever the engine stops, whenever the combined decelerator/brake pedal is fully depressed, when-
ever the park lock lever is placed in the start position, whenever the park brake button is pushed on the dash, whenever the F-N-R control is in the neutral position
for more than seven seconds, or whenever machine motion is sensed with F-N-R in neutral position; machine cannot be driven with brake applied, reducing wear
out or need for adjustment