Filter
Top Products
Signa™ 5 Whirlpool Bath with Integral Skirt - Front
Right Motor/Pump
Model: Y345
Signa™ 5 Bath with Integral Skirt
Model: Y350
Installation Notes
Refer to installation instructions included with fixture before beginning installation.
Please confirm product availability and specifications before commencing with any
installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT TO CHANGE
WITHOUT NOTICE.
Electrical Components and Electrical Specifications do not apply to non-jetted baths.
Ordering Information
Product Code:
Y345 Signa™ 5 Whirlpool Bath with
Integral Skirt - Front Right Mo-
tor/Pump
Y350 Signa™ 5 Bath with Integral Skirt
• Center Drain Location
• Accessories / Hardware:
Trip-Lever Drain Kit #X559
Rotary Drain Kit, 26” Cable #8730
4 X HTC Jet Trim Kit: #D095
2 X BMH Jet Trim Kit: #J869
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(849) – Oil Rubbed Bronze
Technical Specifications
Dimensions
60” L x 42” W x 22” H
(1524 mm) L x (1067 mm) W x (559 mm) H
Drain/Overflow
A: 17-7/8” (451 mm) B: 12-3/4” (330 mm)
Cutout
Not Applicable
Total Weight
Y345: 723 lb (328 kg) / 41 lb/sq. ft. (202 kg/m
2
)
Y350: 682 lb (309 kg) / 38 lb/sq. ft. (186 kg/m
2
)
Operating Gallonage
42 U.S. Gal. (159 Liters)
Max. 82 U.S. Gal. (310 Liters)
Product Weight
Y345: 126 lb (56 kg)
Y350: 82 lb (37 kg)
Skirt Mounting
Integral
Electrical Specifications Model Y345 only
Requires a dedicated GFCI protected separate circuit.
Motor/Pump: 120 VAC, 15 AMP, 60 Hz.
RapidHeat™: 120 VAC, 15 AMP, 60 Hz.
Heater (Optional) Model Y345 only
Requires a dedicated GFCI protected separate circuit.
RapidHeat™: P/N U395000
© Jacuzzi Whirlpool Bath • 14801 Quorum Drive • Dallas • Texas • 75254 • www.jacuzzi.com
#FS14 12/06
*60"
42"
6-3/4"
4-1/4"
16" x 5"*
30"
12-3/4"
L
1"
H
W
SIDE VIEW
END VIEW
DRAIN/OVERFLOW
A
B
Product Shown: Signa™ 5 Whirlpool Bath with Integral Skirt - Front Right Motor/Pump Model: Y345
* Measurements inside unit represent cutout in floor to allow for drain/overflow.