Filter
Top Products
J-200 Series
1
8 9 10 11 12 13 14 15 16 17
2 3 4 5 6 7
13. In tuner mode, any station can be stored
as preset 4 by simply pressing and holding this button for several
seconds. To recall the station preset, simply press and release this
button. In CD mode press this button to randomly play song tracks.
Press again to turn off this feature.
14. In tuner mode, any station can be stored
as preset 5 by simply pressing and holding this button for several
seconds. To recall the station preset, simply press and release this
button. In CD mode this button will browse the folders on CD-R and
CD-RW disks.
15. In tuner mode, any station can be stored
as preset 6 by simply pressing and holding this button for several
seconds. To recall the station preset, simply press and release this
button. In CD mode this button will browse the folders on CD-R and
CD-RW disks.
16. BND Button: Press BND to select one of the following frequency
bands: FM1, FM2, FM3, AM1, AM2 and WB (weather band)
17. Press Track Up to manually adjust
station frequency up. Press and hold Track Up to scan for next
higher station. Scan mode stops as soon as a strong station is found.
Press Track Down to manually adjust frequency down. Press and
hold Track Down to scan for next lower station. Scan mode stops
as soon as a strong station is found. In CD mode pressing these
buttons will advance the CD up or down to the next or previous track.
To fast forward or rewind through a track, simply press and hold
either button as desired during CD playback.
18. Reset Button (Not Illustrated): If keys do not function at all and the
unit appears to be “locked up”, use a ballpoint pen to press the Reset
Button under the front panel (press OPEN to ip down front panel for
access). The Reset Button is located directly below the Eject Button.
Press to clear all memory (except station presets) and reset deck.
Note: This action will reset the display and clock to default setting.
50