Filter
Top Products
59
J-300
B. Bonding the Remote and Stereo
If your remote does not operate the stereo, you may need to bond them
by pressing on of the following methods:
Press and hold the MUTE button for 5 seconds or;•
Press the four buttons MODE, MUTE, BAND/SEARCH, and TOP •
buttons at the corners one by one clockwise. This must be completed
within two seconds.
A.
1. Plug in the iPod/MP3 Player (purchased separately) with supplied
mini RCA cable into the auxiliary port (Figure A).
2. Plug the other end of the supplied cable into the phone jack
connection on the iPod/MP3 Player (Figure B).
B.
1. Select preferred song/album/play list and start playback prior to
plugging in iPod/MP3 Player.
2. Press the “Mode” button on stereo receiver or the mode button on
the remote until the display reads “AUX”.
C.
All playback operations are conducted via the iPod/MP3 Player. The
Stereo Deck and/or Stereo Remote functions do not work on the
external iPod/MP3 Player (except volume control).
CAUTION
: RISK OF ELECTRICAL SHOCK OR EQUIP-
MENT DAMAGE!
Never install, remove or operate iPod/MP3 Player while hands
are wet or while sitting partially or fully immersed in spa!
Figure A
Figure B
(iPod purhased separately)