Filter
Top Products
Mito
™
5
WHIRLPOOL BATH
Technical Specifications
DIMENSIONS
60” L x 42” W x 21” H
(1524 mm) L x (1067 mm) W x (533 mm) H
DRAIN/OVERFLOW
A: 17-1/2” (445 mm) B: 11-7/8” (302 mm)
CUTOUT
58” x 40”
TOTAL WEIGHT
H520, H519: 866 lb (393 kg) / 50 lb/sq. ft. (242 kg/m
2
)
H521: 842 lb (382 kg) / 48 lb/sq. ft. (235 kg/m
2
)
OPERATING GALLONAGE
62 U.S. Gal. (235 Liters)
PRODUCT WEIGHT
H520, H519: 100 lb (45 kg)
H521: 76 lb (35 kg)
SKIRT MOUNTING
Optional U-Frame
ELECTRICAL SPECIFICATIONS MODELS H520, H519 ONLY
Requires a dedicated GFCI protected separate circuit.
Motor/Pump: 120 VAC, 15 AMP, 60 Hz.
RapidHeat™: 120 VAC, 15 AMP, 60 Hz.
HEATER (OPTIONAL) MODELS H520, H519 ONLY
Requires a dedicated GFCI protected separate circuit.
RapidHeat™: P/N S750000
© 2008 Jacuzzi Whirlpool Bath • 14880 Monte Vista Avenue • Chino, CA 91710 • www.jacuzzi.com
INSTALLATION NOTES
Refer to installation instructions included with xture before
beginning installation. Please conrm product availability and
specications before commencing with any installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT
TO CHANGE WITHOUT NOTICE.
#FR70000 01/08
H520
Mito™ 5 Whirlpool Bath, Right Hand Pump
H519
Mito™ 5 Whirlpool Bath, Left Hand Pump
H521
Mito™ 5 Bath
• Center Drain Location
• Accessories / Hardware:
Trip-Lever Drain Kit #X559
Rotary Drain Kit, 26” Cable #8730
HTC Jet Trim Kit: #D095
2 X BMH Jet Trim Kit: #J869
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(849) – Oil Rubbed Bronze
Mito
™
5
SOAKER BATH
Electrical Components and Electrical Specifications do not apply
to non-jetted baths.
30"
42"
60"
10" x 4"*
2"
11-7/8"
Motor
12" H x 18" L
Service Access
Opt. Service
Access
5-3/8"
END VIEW
H
W
SIDE VIEW
L
2"
DRAIN/OVERFLOW
A
B
Product Shown: Mito
™
5 Whirlpool Bath Right
Hand Shown Model: H520
* Measurements inside unit represent cutout in
floor to allow for drain/overflow.
Minimum Service Access dimensions given.