Jacuzzi FR62 Hot Tub User Manual


  Open as PDF
of 2
 
Majora® 5 Whirlpool Bath
Model: H537, H538
Majora® 5 Bath
Model: H539
Installation Notes
Refer to installation instructions included with fixture before beginning installation.
Please confirm product availability and specifications before commencing with any
installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT TO CHANGE
WITHOUT NOTICE.
Electrical Components and Electrical Specifications do not apply to non-jetted baths.
Ordering Information
Product Code:
H538 Majora® 5 Whirlpool Bath
Right Hand
H537 Majora® 5 Whirlpool Bath
Left Hand
H539 Majora® 5 Bath
• Right and Left Hand Drain Location
• Accessories / Hardware:
Trip-Lever Drain Kit #X559
Rotary Drain Kit, 26” Cable #8730
HTC Jet Trim Kit: #D095
BMH Jet Trim Kit: #J869
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(849) – Oil Rubbed Bronze
Technical Specifications
Dimensions
60” L x 42” W x 19-1/2” H
(1524 mm) L x (1067 mm) W x (495 mm) H
Drain/Overflow
A: 15” (381 mm) B: 8-3/4” (222 mm)
Cutout
58” x 40”
Total Weight
H537, H538: 728 lb (330 kg) / 42 lb/sq. ft. (203 kg/m
2
)
H539: 703 lb (319 kg) / 40 lb/sq. ft. (196 kg/m
2
)
Operating Gallonage
46 U.S. Gal. (172 Liters)
Product Weight
H537, H538: 95 lb (43 kg)
H539: 70 lb (32 kg)
Skirt Mounting
Not Available
Electrical Specifications Models H537, H538 only
Requires a dedicated GFCI protected separate circuit.
Motor/Pump: 120 VAC, 15 AMP, 60 Hz.
RapidHeat™: 120 VAC, 15 AMP, 60 Hz.
Heater (Optional) Models H537, H538 only
Requires a dedicated GFCI protected separate circuit.
RapidHeat™: P/N S750000
42"
60"
21"
8-3/4"
10" x 4"*
2"
Motor
12" H x 18" L
Service Access
Opt. Service Access
4-3/8"
© Jacuzzi Whirlpool Bath • 14801 Quorum Drive • Dallas • Texas • 75254 • www.jacuzzi.com
END VIEW
H
W
SIDE VIEW
L
2"
#FR62 12/06
DRAIN/OVERFLOW
A
B
Product Shown: Majora® 5 Whirlpool Bath Left Hand Model: H537
* Measurements inside unit represent cutout in floor to allow for drain/overflow.
Minimum Service Access dimensions given.
 previous