Nova™ 6 Pure Air® II Bath
Model: EA10
Installation Notes
Refer to installation instructions included with fixture before beginning installation.
Please confirm product availability and specifications before commencing with any
installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT TO CHANGE
WITHOUT NOTICE.
Electrical Components and Electrical Specifications do not apply to non-jetted baths.
Ordering Information
Product Code:
EA10 Nova™ 6 Pure Air II Bath
Left Hand
• Left Hand Drain Location
• Accessories / Hardware:
Trip-Lever Drain Kit #X559
Rotary Drain Kit, 26” Cable #8730
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(849) – Oil Rubbed Bronze
Technical Specifications
Dimensions
72” L x 42” W x 20-1/2” H
(1829 mm) L x (1067 mm) W x (521 mm) H
Drain/Overflow
A: 14-3/4” (375 mm) B: 8-1/2” (216 mm)
Cutout
70” x 40” (1778 mm x 1016 mm)
Total Weight
1026.4 lb (466 kg)/48.9 lb/ft
2
(239 kg/m
2
)
Operating Gallonage
67 U.S. Gal. (30 Liters)
Min. 56 U.S. Gal. (212 Liters)
Max. 77 U.S.Gal. (292 Liters)
Product Weight
135 lb (61 kg)
Skirt Mounting
Optional, U-Frame
Electrical Specifications
Requires a dedicated GFCI protected separate circuit.
Blower: 120 VAC, 15 AMP, 60 Hz.
Heater
No water heater is available on this unit. Blower has integral air heater.
*72"
21"
2"
2"
42"
14" x 4"
8-1/2"
6-7/8"
Blower
12" H x 18" L
Service Access
Opt. Service Access
© Jacuzzi Whirlpool Bath • 14801 Quorum Drive • Dallas • Texas • 75254 • www.jacuzzi.com
NOVA® 6, RIGHT HAND PURE AIR II BATH
END VIEW
20-1/2"
42"
SIDE VIEW
72"
2"
(51 mm)
(Blower)
#FQ96 12/06
DRAIN/OVERFLOW
A
B
Product Shown: Nova™ 6 Pure Air II Bath Left Hand Model: EA10
* Measurements inside unit represent cutout in floor to allow for drain/overflow.
Minimum Service Access dimensions given.