Jacuzzi F947-RH Hot Tub User Manual


  Open as PDF
of 2
 
Luxura® 5.5 Whirlpool Bath
Model: F946, F947
Luxura® 5.5 Bath
Model: F948
Installation Notes
Refer to installation instructions included with fixture before beginning installation.
Please confirm product availability and specifications before commencing with any
installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT TO CHANGE
WITHOUT NOTICE.
Electrical Components and Electrical Specifications do not apply to non-jetted baths.
Ordering Information
Product Code:
F947 Luxura® 5.5 Whirlpool Bath
Right Hand
F946 Luxura® 5.5 Whirlpool Bath
Left Hand
F948 Luxura® 5.5 Bath
• Right and Left Hand Drain Location
• Accessories / Hardware:
Trip-Lever Drain Kit #X559
Rotary Drain Kit, 26” Cable #8730
HTC Jet Trim Kit: #D095
BMH Jet Trim Kit: #J869
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(845) – Oil Rubbed Bronze
Technical Specifications
Dimensions
66” L x 34” W x 20” H
(1676 mm) L x (864 mm) W x (508 mm) H
Drain/Overflow
A: 15-1/4” (387 mm) B: 8-3/8” (213 mm)
Cutout
64” x 32”
Total Weight
F946, F947: 823 lb (373 kg) / 53 lb/sq. ft. (258 kg/m
2
)
F948: 798 lb (362 kg) / 51 lb/sq. ft. (250 kg/m
2
)
Operating Gallonage
58 U.S. Gal. (220 Liters)
Product Weight
F946, F947: 90 lb (41 kg)
F948: 65 lb (29 kg)
Skirt Mounting
Optional, U-Frame
Electrical Specifications Models F946, F947 only
Requires a dedicated GFCI protected separate circuit.
Motor/Pump: 120 VAC, 15 AMP, 60 Hz.
RapidHeat™: 120 VAC, 15 AMP, 60 Hz.
Heater (Optional) Models F946, F947 only
Requires a dedicated GFCI protected separate circuit.
RapidHeat™: P/N S750000
12" x 5"
2-1/2"
*66"
17"
34"
8-3/8"
Motor
12" H x 18" L
Service Access
Opt. Service Access
2-1/2"
5-3/8"
© Jacuzzi Whirlpool Bath • 14801 Quorum Drive • Dallas • Texas • 75254 • www.jacuzzi.com
END VIEW
H
W
SIDE VIEW
L
2"
#FR64 12/06
DRAIN/OVERFLOW
A
B
Product Shown: Luxura® 5 Whirlpool Bath Left Hand Model: F946
* Measurements inside unit represent cutout in floor to allow for drain/overflow.
 previous