Jacuzzi F933 Hot Tub User Manual


 
Capella® 60 Whirlpool Bath
Model: F934, G775
Capella® 60 Bath
Model: F933
Installation Notes
Refer to installation instructions included with fi xture before beginning installation.
Please confi rm product availability and specifi cations before commencing with any
installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT TO CHANGE
WITHOUT NOTICE.
Electrical Components and Electrical Specifi cations do not apply to non-jetted baths.
Ordering Information
Product Code:
F933 Capella®60 Bath
F934 Capella® 60 Whirlpool Bath
Right Hand
G775 Capella®60 Whirlpool Bath
Left Hand
• Center Drain Location
• Accessories / Hardware:
Trip-Lever Drain Kit: #X559
Rotary Drain Kit, 26” Cable: #8730
TheraPro™ Jet Rings Kit #D095
AccuPro™ Jet Rings Kit #P556
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(845) – Oil Rubbed Bronze
Technical Specifi cations
Dimensions
60” L x 60” L x 20-1/2” H
(1524 mm) L x (1524 mm) L x (521 mm) H
Drain/Overfl ow
A: 18” (457 mm) B: 12-1/8” (308 mm)
Cutout
See below
Total Weight
G775, F934: 870 lb (395 kg) / 35 lb/sq. ft. (170 kg/m
2
)
F933: 845 lb (383 kg) / 34 lb/sq. ft. (165 kg/m
2
)
Operating Gallonage
60 U.S. Gal. (227 Liters),
Max. 90 U.S. Gal. (341 Liters)
Product Weight
G775, F934: 120 lb (54 kg)
F933: 95 lb (43 kg)
Skirt Mounting
Not Available
Electrical Specifi cations Models F934 & G775 only
Requires a dedicated GFCI protected separate circuit.
Motor/Pump: 120 VAC, 15 AMP, 60 Hz.
Heater
Not Available
27"
27"
60"
43-1/8"
6"
60"
34-15/16"
14" X 4"*
33-1/2"
46-5/8"
Motor
Service
Access
Opt.
Service
Access
90˚
90˚
© Jacuzzi Whirlpool Bath • 14880 Monte Vista Avenue • Chino • CA • 91710 • www.jacuzzi.com
H
L
2"
SIDE VIEW
END VIEW
#FQ87 06/07
Product Shown: Capella® 60 Corner Whirlpool Bath Model: F934
* Measurements inside unit represent cutout in fl oor to allow for drain/overfl ow.
Minimum Service Access dimensions given.
DRAIN/OVERFLOW
A
B
25-1/2"
58"
58"
25-1/2"
45-9/16"
Drain
Overflow
Motor
Capella Cutout