Filter
Top Products
Bianca® Whirlpool Bath
Model: F500
Bianca® Bath
Model: F505
Installation Notes
Refer to installation instructions included with fi xture before beginning installation.
Please confi rm product availability and specifi cations before commencing with any
installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT TO CHANGE WITHOUT
NOTICE.
Electrical Components and Electrical Specifi cations do not apply to non-jetted baths.
Ordering Information
Product Code:
F500 Bianca® Whirlpool Bath
Left Hand
F505 Bianca® Bath
• Left Hand Drain Location
• Accessories / Hardware:
Trip-Lever Drain Kit: #X559
Rotary Drain Kit, 26” Cable: #8730
1 X TheraPro™ Jet Rings #D095
2 X AccuPro™ Jet Rings #J869
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(849) – Oil Rubbed Bronze
Technical Specifi cations
Dimensions
72”L x 48”W x 20-1/2”H
(1829 mm) L x (1219 mm) W x (514 mm) H
Drain/Overfl ow
A: 16” (406 mm) B: 8-1/2” (216 mm)
Cutout
70” x 46”
Total Weight
F500: 993 lb. (450 kg) / 41 lb/sq. ft. (202 kg/m
2
)
F505: 948 lb. (430 kg) / 40 lb/sq. ft. (193 kg/m
2
)
Operating Gallonage
73 U.S. Gal. (276 liters)
Product Weight
F500: 135 lb. (61 kg)
F505: 90 lb. (41 kg)
Skirt Mounting
Optional U-Frame
Electrical Specifi cations Model F500 Only
Requires a dedicated GFCI protected separate circuit.
Motor/Pump: 120 VAC, 15 AMP, 60 Hz.
RapidHeat™: 120 VAC, 15 AMP, Hz
Heater (Optional) Model F500 Only
Requires a dedicated GFCI protected separate circuit.
RapidHeat™: P/N S750000
*72"
24"
48"
8-1/2"
13-3/4"
13-1/2" x 4"
2"
Motor
12" H x 18" L
Service Access
Opt. Service Access
© Jacuzzi Whirlpool Bath • 14880 Monte Vista Avenue • Chino • CA • 91710 • www.jacuzzi.com
END VIEW
H
W
SIDE VIEW
L
2"
#FR24 07/07
DRAIN/OVERFLOW
A
B
Product Shown: Bianca® Whirlpool Bath Left Hand Shown Model: F500
* Measurements inside unit represent cutout in fl oor to allow for drain/overfl ow.
Minimum Service Access dimensions given.