Jacuzzi EW05 Hot Tub User Manual


 
Finestra
6030
WALK-IN SALON™ SPA BATH
Technical Specifications
DIMENSIONS
60” L x 30” W x 37-1/2” H
(1524 mm) L x (762 mm) W x (952.5 mm) H
DRAIN/OVERFLOW
A: 31-1/2” (800 mm) B: 6-5/8” (168 mm)
CUTOUT
NA
TOTAL WEIGHT
EW05, EW10: 360 lb. (163.5 kg)
EY30, EY35: 360 lb. (163.5 kg)
OPERATING GALLONAGE
Max: 75 U.S. Gal. (284 liters)
Min: 55 U.S. Gal. (208 liters)
PRODUCT WEIGHT
EW05, EW10: 310 lb. (141 kg)
EY30, EY35: 310 lb. (141 kg)
SKIRT MOUNTING
NA
ELECTRICAL SPECIFICATIONS
Motor/Pump and RapidHeat™: 240 VAC, 20 AMP, 60 Hz.
Blower: 120 VAC, 20 AMP, 60 Hz.
Requires two seperate GFCI protected circuits.
HEATER (STANDARD)
RapidHeat™: P/N BN60000
© 2007 Jacuzzi Whirlpool Bath • 14880 Monte Vista Avenue • Chino, CA 91710 • www.jacuzzi.com
INSTALLATION NOTES
Refer to installation instructions included with fixture before
beginning installation. Please confirm product availability and
specifications before commencing with any installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT
TO CHANGE WITHOUT NOTICE.
Finestra™ 6030 Walk-In 14" Seat Salon™ Spa
Bath Left Hand (EW05) shown.
* Measurements inside unit represent cutout in
floor to allow for drain/overflow.
Minimum service access dimensions given.
#EZ89000 10/07
EW05
Finestra™ 6030 Walk-In 14" Seat Salon™ Spa Bath,
Left Hand
EW10
Finestra™ 6030 Walk-In 14" Seat Salon™ Spa Bath,
Right Hand
EY30
Finestra™ 6030 Walk-In 17" Seat Salon™ Spa Bath,
Left Hand
EY35
Finestra™ 6030 Walk-In 17" Seat Salon™ Spa Bath,
Right Hand
• Left and Right Hand drain locations
• Accessories / Hardware:
Drain Kit: #FB48000
Remote Drain Kit: #FC30000
Pillow: #EK91959
• Trim Kit Finishes Available:
(827) – Chrome
(829) – Bright Brass
(959) – White
DRAIN/OVERFLOW
A
B
60"
30"
17-1/2"
5"
15"
6-5/8”
37"
13-3/4"
20"
4" x 16"
Motor
SeatFloor
FINESTRA™ 6030
Blower
Heater
27" H x 24" L
Service Access
27" H x 9" L
Service Access
Door
BACK FRONTLEFT END RIGHT END
L
H
W
14" or 17"
1-1/2"
2"
6-1/2"
29-1/2"
16-3/4"
17-1/2"
13-3/4"
Service Access
Service
Access