Jacuzzi EP00 Hot Tub User Manual


  Open as PDF
of 2
 
Mito
™
5
WHIRLPOOL PLUS BATH
Technical Specifications
DIMENSIONS
60” L x 42” W x 21” H
(1524 mm) L x (1067 mm) W x (533 mm) H
DRAIN/OVERFLOW
A: 17-1/2” (445 mm) B: 11-7/8” (302 mm)
CUTOUT
58” x 40”
TOTAL WEIGHT
866 lb (393 kg) / 50 lb/sq. ft. (242 kg/m
2
)
OPERATING GALLONAGE
62 U.S. Gal. (235 Liters)
Min. 39 U.S. Gal. (148 Liters)
Max. 73 U.S. Gal. (276 Liters)
PRODUCT WEIGHT
109 lb (49.5 kg)
SKIRT MOUNTING
Optional U-Frame
ELECTRICAL SPECIFICATIONS
Requires a dedicated GFCI protected separate circuit.
Motor/Pump: 120 VAC, 15 AMP, 60 Hz.
RapidHeat™: 120 VAC, 15 AMP, 60 Hz.
HEATER
Requires a dedicated GFCI protected separate circuit.
RapidHeat™: P/N S750000
© 2008 Jacuzzi Whirlpool Bath • 14880 Monte Vista Avenue • Chino, CA 91710 • www.jacuzzi.com
INSTALLATION NOTES
Refer to installation instructions included with xture before
beginning installation. Please conrm product availability and
specications before commencing with any installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT
TO CHANGE WITHOUT NOTICE.
#HP21000 01/08
EN90
Mito™ 5 Whirlpool Bath, Right Hand Pump
EP00
Mito™ 5 Whirlpool Bath, Left Hand Pump
• Center Drain Location
• Accessories / Hardware:
Trip-Lever Drain Kit #X559
Rotary Drain Kit, 26” Cable #8730
HTC Jet Trim Kit: #D095
2 X BMH Jet Trim Kit: #J869
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(849) – Oil Rubbed Bronze
Electrical Components and Electrical Specifications do not apply
to non-jetted baths.
MITO™ 5 PLUS, Right Hand
30"
42"
*60"
10" x 4"
2"
11-7/8"
Motor
12" H x 18" L
Service Access
Opt. Service
Access
5-3/8"
Heater
END VIEW
H
W
SIDE VIEW
L
2"
DRAIN/OVERFLOW
A
B
Product Shown: Mito
™
5 Whirlpool Plus Bath
Right Hand Shown Model: EN90
* Measurements inside unit represent cutout in
floor to allow for drain/overflow.
Minimum Service Access dimensions given.
 previous