Jacuzzi EM90 Hot Tub User Manual


  Open as PDF
of 2
 
Capella™ Plus Whirlpool Bath
Model: EM90, EN00
Installation Notes
Refer to installation instructions included with fixture before beginning installation.
Please confirm product availability and specifications before commencing with any
installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT TO CHANGE
WITHOUT NOTICE.
Ordering Information
Product Code:
EM90 Capella™ Plus Whirlpool Bath
Right Hand
EN00 Capella™ Plus Whirlpool Bath
Left Hand
• Center Drain Location
• Accessories / Hardware:
Trip-Lever Drain Kit #X559
Rotary Drain Kit, 26” Cable #8730
HTC Jet Trim Kit: #D095
BMH Jet Trim Kit (3 Req’d): #J869
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(845) – Oil Rubbed Bronze
Technical Specifications
Dimensions
60” L x 60” L x 20-1/2” H
(1524 mm) L x (1524 mm) L x (521 mm) H
Drain/Overflow
A: 18” (457 mm) B: 12-1/8” (308 mm)
Cutout
See Illustrations Below
Total Weight
1177 lb (535 kg) / 47.8 lb/ft
2
(233 kg/m
2
)
Operating Gallonage
MIN: 55 U.S. gal (208 liters)
MAX: 90 U.S. gal (341 liters)
Product Weight
130 lb (59 kg)
Skirt Mounting
Optional
Electrical Specifications
Requires a dedicated GFCI protected separate circuit.
Motor/Pump: 120 VAC, 15 AMP, 60 Hz.
RapidHeat™: 120 VAC, 15 AMP, 60 Hz.
Heater (Standard)
Requires a dedicated GFCI protected separate circuit.
RapidHeat™: P/N S750000
© Jacuzzi Whirlpool Bath • 14801 Quorum Drive • Dallas • Texas • 75254 • www.jacuzzi.com
#BW07 01/07
DRAIN/OVERFLOW
A
B
Product Shown: Capella™ Left Hand Motor Plus Whirlpool Bath LH Model: EN00
* Measurements inside unit represent cutout in floor to allow for drain/overflow.
Minimum Service Access dimensions given.
CAPELLA™ 60 PLUS , Left Hand
27"
46-5/8"
27"
60"
43-1/8"
6"
60"
34-15/16"
14" X 4"
33-1/2"
Motor
Service
Access
Opt.
Service
Access
Heater
Motor
Heater
25-5/8"
45-3/7"
25-5/8"
58"
58"
Drain Cutout
(651 mm)
(1162 mm)
(1473 mm)
(651 mm)
Ref.
59-1/8"
(1473 mm)
(1502 mm)
CAPELLA™ 60 PLUS, Left Hand
CUTOUT
H
SIDE VIEW
END VIEW
2”
CAPELLA™ PLUS LEFT HAND MOTOR
(50,8 mm)
(Suction Heater)
(Motor)
CAPELLA™ 60 PLUS, Right Hand
CUTOUT
Motor
Heater
25-5/8"
45-3/7"
25-5/8"
58"
58"
Drain Cutout
(651 mm)
(1162 mm)
(1473 mm)
(651 mm)
Ref.
59-1/8"
(1473 mm)
(1502 mm)
 previous