Filter
Top Products
Technical Specifications
DIMENSIONS
66" L x 66" W x 22
3
⁄4" H
(1676) mm L x (1676) mm W x (578) mm H
DRAIN/OVERFLOW
A: 16
13
⁄16" (427 mm) B: 12
1
⁄8" (308 mm)
CUTOUT
See Below
TOTAL WEIGHT
TBD
OPERATING GALLONAGE
TBD
PRODUCT WEIGHT
TBD
SKIRT MOUNTING
Not Available
ELECTRICAL SPECIFICATIONS
Requires a dedicated GFCI protected separate circuit.
Motor/Pump: 120 VAC, 20 AMP, 60 Hz.
RapidHeat™: 120 VAC, 15 AMP, 60 Hz.
HEATER (STANDARD)
Requires a dedicated GFCI protected separate circuit.
RapidHeat™: P/N S750000
© 2007 Jacuzzi Whirlpool Bath • 14880 Monte Vista Avenue • Chino, CA 91710 • www.jacuzzi.com
INSTALLATION NOTES
Refer to installation instructions included with fixture before
beginning installation. Please confirm product availability and
specifications before commencing with any installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT
TO CHANGE WITHOUT NOTICE.
#FR44000 10/07
Fuzion
™
6666
WHIRLPOOL BATH with CHROMATHERAPY
EH20
Fuzion™ 6666 Whirlpool Bath Teak, Left Hand
EG90
Fuzion™ 6666 Whirlpool Bath Teak, Right Hand
EH25
Fuzion™ 6666 Whirlpool Bath Wenge, Left Hand
EG95
Fuzion™ 6666 Whirlpool Bath Wenge, Right Hand
Fuzion
™
6666
WHIRLPOOL BATH with ILLUMATHERAPY
™
EH35
Fuzion™ 6666 Whirlpool Bath Teak, Left Hand
EH05
Fuzion™ 6666 Whirlpool Bath Teak, Right Hand
EH40
Fuzion™ 6666 Whirlpool Bath Wenge, Left Hand
EH10
Fuzion™ 6666 Whirlpool Bath Wenge, Right Hand
• Center Drain Location
• Overflow fitting comes with tub
• Accessories / Hardware:
HTC Jet Trim Kit: #D095
Oval Trim Kit: #N557
BMH 2 Jet trim Kit: # J869
(2 kits required)
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(845) – Oil Rubbed Bronze
Faucet Installation Note:
Selecting a faucet for rim
mounting: The combined
thickness at the rim of the
tub shell and the wood
trim is 2" (50,8 mm)
nominal. The length of
the faucet tailpiece(s) must
be long enough to extend
past this dimension and
have ample clearance to
assemble any hardware
(i.e. locknut, water supply
fittings, etc.) necessary for
installation.
Motor
12" H x 18" L
Service Access
Heater (S)
46.61"
66"
20" X 4"
32.97"
Ref.
66"
37.23"
9.29"
32.97"
40.94"
40.94"
69.68"
FUZION 6666 CORNER WITH WOOD FRAME
LEFT HAND MOTOR
(Heater)
(Motor)
L
H
W
(159 mm)
6-1/4"
SIDE VIEW END VIEW
DRAIN/OVERFLOW
B
A
Product Shown: Fuzion™ 6666 Whirlpool Bath Teak
with Illumatherapy Left Hand Model: EH35
* Measurements inside unit represent cutout in floor to
allow for drain/overflow.
Minimum Service Access dimensions given.
48"
65"
32"
Ref.
67-1/2"
65"
32"
DRAIN
Motor
Blower
CUTOUT