Jacuzzi EG80 Hot Tub User Manual


 
S
IDE VIEW END VIEW END VIEW
(Motor 1)
(Heater 1 & 2)
(Motor 2)
B
A
DRAIN/OVERFLOW
L
H
W
6-1/4"
(
159 mm
)
Technical Specifications
DIMENSIONS
72" L x 60" W x 22
3
4" H
(1829 mm) L x (1524 mm) W x (578 mm) H
DRAIN/OVERFLOW
A: 16-3/4” (425 mm) B: 12-1/16” (306 mm)
CUTOUT
71” x 59”
(1803 ) mm x (1499) mm
TOTAL WEIGHT
1849 lb (839 kg) / 62 lb/ft
2
(301 kg/m
2
)
OPERATING GALLONAGE
129 U.S. Gal. (488 Liters)
PRODUCT WEIGHT
319 lb (145 kg)
SKIRT MOUNTING
Not Available
ELECTRICAL SPECIFICATIONS
Requires dedicated GFCI protected separate circuits.
1st Motor/Pump and RapidHeat™: 240VAC, 20AMP, 60 Hz.
2nd Motor/Pump and RapidHeat™: 240VAC, 20AMP, 60 Hz.
HEATER (STANDARD)
RapidHeat™: P/N BN60000
© 2007 Jacuzzi Whirlpool Bath • 14880 Monte Vista Avenue • Chino, CA 91710 • www.jacuzzi.com
INSTALLATION NOTES
Refer to installation instructions included with fixture before
beginning installation. Please confirm product availability and
specifications before commencing with any installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT
TO CHANGE WITHOUT NOTICE.
#FR47000 10/07
Fuzion
7260
WHIRLPOOL BATH, DUAL with CHROMATHERAPY
EG65
Fuzion™ 7260 Whirlpool Bath Dual, Wenge
EG60
Fuzion™ 7260 Whirlpool Bath Dual, Teak
Fuzion
7260
WHIRLPOOL BATH, DUAL with ILLUMATHERAPY
EG80
Fuzion™ 7260 Whirlpool Bath Dual, Wenge
EG75
Fuzion™ 7260 Whirlpool Bath Dual, Teak
• Right Hand Drain Location
• Overflow fitting comes with tub
• Accessories / Hardware:
HTC Jet Trim Kit: #D095
Oval Trim Kit: #N557
BMH 2 Jet trim Kit: # J869
(6 kits required)
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(845) – Oil Rubbed Bronze
Faucet Installation Note:
Selecting a faucet for rim mounting: The combined thickness at the
rim of the tub shell and the wood trim is 2” (50,8 mm) nominal.
The length of the faucet tailpiece(s) must be long enough to extend
past this dimension and have ample clearance to assemble any
hardware (i.e. locknut, water supply fittings, etc.) necessary for
installation.
Motor
Heater (S)
72"
60"
36"
24.19"
12"
8.47"
18-1/2" x 4"
12" H x 18" L
Service Access
Optional
Service Access
Motor
Heater (S)
12" H x 18" L
Service Access
Optional Service Access
FUZION 7260 DUAL MOTOR WITH WOOD FRAME
Product Shown: Fuzion™ 7260 Whirlpool Bath Wenge
with Illumatherapy — Dual Motor Model: EG80
* Measurements inside unit represent cutout in floor to
allow for drain/overflow.
Minimum Service Access dimensions given.