Filter
Top Products
Technical Specifications
DIMENSIONS
72" L x 36" W x 22
3
⁄4" H
(1829 mm) L x (914 mm) W x (578 mm) H
DRAIN/OVERFLOW
A: 17" (432 mm) B: 10
1
⁄4" (260 mm)
CUTOUT
69
1
⁄2" x 34
3
⁄8"
TOTAL WEIGHT
1239 lb (561kg) / 69 lb/ft
2
(336 kg/m
2
)
OPERATING GALLONAGE
82 U.S. Gal. (310 Liters)
Max. 94 U.S. Gal. (360 Liters)
PRODUCT WEIGHT
195 lb. (88 kg)
SKIRT MOUNTING
Not Available
ELECTRICAL SPECIFICATIONS
Requires a dedicated GFCI protected separate circuit.
Motor/Pump: 120 VAC, 20 AMP, 60 Hz.
RapidHeat™: 120 VAC, 15 AMP, 60 Hz.
HEATER (STANDARD)
Requires a dedicated GFCI protected separate circuit.
RapidHeat™: P/N S750000
© 2007 Jacuzzi Whirlpool Bath • 14880 Monte Vista Avenue • Chino, CA 91710 • www.jacuzzi.com
INSTALLATION NOTES
Refer to installation instructions included with fixture before
beginning installation. Please confirm product availability and
specifications before commencing with any installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT
TO CHANGE WITHOUT NOTICE.
#FR45000 10/07
Fuzion
™
7236
WHIRLPOOL BATH with CHROMATHERAPY
EF75
Fuzion™ 7236 Whirlpool Bath Wenge, Left Hand
EF45
Fuzion™ 7236 Whirlpool Bath Wenge, Right Hand
EF70
Fuzion™ 7236 Whirlpool Bath Teak, Left Hand
EF40
Fuzion™ 7236 Whirlpool Bath Teak, Right Hand
Fuzion
™
7236
WHIRLPOOL BATH with ILLUMATHERAPY
™
EF90
Fuzion™ 7236 Whirlpool Bath Wenge, Left Hand
EF60
Fuzion™ 7236 Whirlpool Bath Wenge, Right Hand
EF85
Fuzion™ 7236 Whirlpool Bath Teak, Left Hand
EF55
Fuzion™ 7236 Whirlpool Bath Teak, Right Hand
• Left or Right Hand Drain Locations
• Overflow fitting comes with tub
• Accessories / Hardware:
HTC Jet Trim Kit: #D095
Oval Trim Kit: #N557
BMH 2 Jet trim Kit: # J869
(4 kits required)
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(845) – Oil Rubbed Bronze
Faucet Installation Note:
Selecting a faucet for rim mounting: The combined thickness at the
rim of the tub shell and the wood trim is 2" (50,8 mm) nominal.
The length of the faucet tailpiece(s) must be long enough to extend
past this dimension and have ample clearance to assemble any
hardware (i.e. locknut, water supply fittings, etc.) necessary for
installation.
B
A
DRAIN/OVERFLOW
SIDE VIEW
(Motor)
(Heater)
END VIEW
H
W
L
(133 mm)
5-1/4"
Motor
12" H x 18" L
Service Access
Opt. Service Access
17-11/16''
2''
7''
10-1/4''
12'' x 4"*
Heater (S)
70-11/16''
35-3/8''
Product Shown: Fuzion™ 7236 Whirlpool Bath
with Illumatherapy™ Left Hand Model
* Measurements inside unit represent cutout in
floor to allow for drain/overflow.
Minimum Service Access dimensions given.