Jacuzzi EE65 Hot Tub User Manual


  Open as PDF
of 2
 
Technical Specifications
DIMENSIONS
66” L x 42” W x 26” H
(1676 mm) L x (1067 mm) W x (660 mm) H
DRAIN/OVERFLOW
A: 18.4” (467 mm) B: 11” (279 mm)
CUTOUT
Template Provided Part Number: DA07000
TOTAL WEIGHT
1106 lb (502 kg) / 57.5 lb/ft
2
(281 kg/m
2
)
OPERATING GALLONAGE
93 U.S. Gal. (352 Liters)
Min. 90 U.S. Gal. (341 Liters)
Max: 95 U.S. Gal. (360 Liters)
PRODUCT WEIGHT
EE60: TBD
EE65: 117 lbs (53 kg)
SKIRT MOUNTING
Not Available
ELECTRICAL SPECIFICATIONS
Requires a dedicated GFCI protected separate circuit.
Motor/Pump: 120 VAC, 20 AMP, 60 Hz.
RapidHeat™: 120 VAC, 15 AMP, 60 Hz.
HEATER (STANDARD)
Requires a dedicated GFCI protected separate circuit.
RapidHeat™: P/N S750000
© 2008 Jacuzzi Whirlpool Bath • 14880 Monte Vista Avenue • Chino, CA 91710 • www.jacuzzi.com
INSTALLATION NOTES
Refer to installation instructions included with xture before
beginning installation. Please conrm product availability and
specications before commencing with any installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT
TO CHANGE WITHOUT NOTICE.
#FR34000 01/08
Duetta
™
6642
WHIRLPOOL BATH
EE60
Duetta™ 6642 Whirlpool Bath with Chromatherapy
Right Hand
EE65
Duetta™ 6642 Whirlpool Bath with Illumatherapy™
Right Hand
• Center Drain Location
• Accessories / Hardware:
TheraPro™ Jet Rings Kit: #D095
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(845) – Oil Rubbed Bronze
11.04"
66"
42"
33
"
3.84"
13" x 4"
2"
Motor
Heater
12" H x 18" L
Service Access
Opt. Service
Access
END VIEW
H
W
SIDE VIEW
L
1/2"
DRAIN/OVERFLOW
A
B
Product Shown: Duetta™ Whirlpool Bath
Right Hand Shown Model: EE65
* Measurements inside unit represent cutout
in floor to allow for drain/overflow.
Minimum Service Access dimensions given.
 previous