Jacuzzi EE10 Hot Tub User Manual


  Open as PDF
of 2
 
Bellavista
™
5
WHIRLPOOL BATH
Technical Specifications
DIMENSIONS
60” L x 42” W x 26” H
(1524 mm) L x (1067 mm) W x (660 mm) H
DRAIN/OVERFLOW
A: 20” (508 mm) B: 11-3/4” (298 mm)
CUTOUT
Template Provided P/N P187000
TOTAL WEIGHT
1026 lb (465 kg) / 59 lb/sq. ft. (288 kg/m
2
)
OPERATING GALLONAGE
80 U.S. Gal. (303 Liters)
PRODUCT WEIGHT
160 lb (50 kg)
SKIRT MOUNTING
Not Available
ELECTRICAL SPECIFICATIONS — Model EE15 only
Requires a dedicated GFCI protected separate circuit.
Motor/Pump: 120 VAC, 20 AMP, 60 Hz.
RapidHeat™: 120 VAC, 15 AMP, 60 Hz.
HEATER (STANDARD) — Model EE15 only
Requires a dedicated GFCI protected separate circuit.
RapidHeat™: P/N S750000
© 2007 Jacuzzi Whirlpool Bath • 14880 Monte Vista Avenue • Chino, CA 91710 • www.jacuzzi.com
INSTALLATION NOTES
Refer to installation instructions included with fixture before
beginning installation. Please confirm product availability and
specifications before commencing with any installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT
TO CHANGE WITHOUT NOTICE.
#FR18000 10/07
EE10
Bellavista™ 5 Whirlpool Bath, Right Hand
• Center Drain Location
• Accessories / Hardware:
PowerPro™ Jet Rings: #M952
AccuPro™ Neck Jet Rings Kit: #P556
(3 Required)
Oval Trim Kit: #N557
Rotary Drain Kit, 26” Cable: #8730
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(849) – Oil Rubbed Bronze
7"
32-1/2"
11-3/4"
6"
30-1/8"
42"
60"
4" x 4"*
Motor
Heater
12" H x 18" L
Service Access
Opt. Service Access
END VIEW
SIDE VIEW
2"
L
W
H
(Heater)
(Motor)
(51 mm)
MAX. 1/2"**
DRAIN/OVERFLOW
A
B
Product Shown: Bellavista™ 5 Whirlpool
Bath Right Hand Shown, Model: EE10
* Measurements inside unit represent cutout
in floor to allow for drain/overflow.
Minimum Service Access dimensions given.
 previous