Filter
Top Products
Signa® 5 Pure Air® II Bath
Model: EA80
Installation Notes
Refer to installation instructions included with fixture before beginning installation.
Please confirm product availability and specifications before commencing with any
installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT TO CHANGE
WITHOUT NOTICE.
Ordering Information
Product Code:
EA80 Signa® 5 Pure Air® II Bath
Right Hand
• Center Drain Location
• Accessories / Hardware:
Trip-Lever Drain Kit #X559
Rotary Drain Kit, 26” Cable #8730
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(849) – Oil Rubbed Bronze
Technical Specifications
Dimensions
60” L x 42” W x 22” H
(1524 mm) L x (1067 mm) W x (559 mm) H
Drain/Overflow
A: 17-1/2” (445 mm) B: 12-1/2” (318 mm)
Cutout
58” x 40” (1473 mm x 1016 mm)
Total Weight
1061 lb (481 kg) / 58.9 lb/ft
2
(288 kg/m
2
)
Operating Gallonage
64 U.S. Gal. (242 Liters)
Min. 46 U.S. Gal. (174 liters)
Max. 82 U.S. Gal. (310 liters)
Product Weight
128 lb (58 kg)
Skirt Mounting
Optional, U-Frame
Electrical Specifications
Requires a dedicated GFCI protected separate circuit.
Blower: 120 VAC, 15 AMP, 60 Hz.
Heater
No water heater is available on this unit. Blower has integral air heater.
*60"
12"
42"
5"
4-1/4"
13" x 5"
30"
Blower
12" H x 18" L
Service Access
Opt.
Service
Access
© Jacuzzi Whirlpool Bath • 14801 Quorum Drive • Dallas • Texas • 75254 • www.jacuzzi.com
SIGNA® 5, RIGHT HAND AIR BATH
END VIEW
22"
42
"
SIDE VIEW
60"
2"
(51 mm)
(Blower)
#FQ92 12/06
DRAIN/OVERFLOW
A
B
Product Shown: Signa® 5 Pure Air® II Bath Right Hand Model: EA80
* Measurements inside unit represent cutout in floor to allow for drain/overflow.
Minimum Service Access dimensions given.