Jacuzzi DT20 Hot Tub User Manual


  Open as PDF
of 2
 
Bellavista
™
CORNER SALON™ SPA BATH
Technical Specifications
DIMENSIONS
60” L x 60” W x 25” H
(1524 mm) L x (1524 mm) W x (635 mm) H
DRAIN/OVERFLOW
A: 18-7/8” (479 mm) B: 14” (356 mm)
CUTOUT
Template Provided P/N P654000
TOTAL WEIGHT
1165 lb (528 kg) / 49.6 lb/ft
2
(242) kg/m
2
)
OPERATING GALLONAGE
87 U.S. Gal. (329 Liters)
Min. 83 U.S. Gal. (314 Liters)
Max. 91 U.S. Gal. (344 Liters)
PRODUCT WEIGHT
197 lb (89 kg)
SKIRT MOUNTING
Not Available
ELECTRICAL SPECIFICATIONS
Requires a dedicated GFCI protected separate circuit.
Blower: 120VAC, 20AMP, 60 Hz.
Motor/Pump and RapidHeat™: 240VAC, 20AMP, 60 Hz.
HEATER (STANDARD)
Requires a dedicated GFCI protected separate circuit.
RapidHeat™: P/N BN60000
© 2007 Jacuzzi Whirlpool Bath • 14880 Monte Vista Avenue • Chino, CA 91710 • www.jacuzzi.com
INSTALLATION NOTES
Refer to installation instructions included with fixture before
beginning installation. Please confirm product availability and
specifications before commencing with any installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT
TO CHANGE WITHOUT NOTICE.
#FS01000 10/07
DT20
Bellavista™ Corner
Salon™ Spa
with RapidHeat™
Right Hand
• Center Drain Location
• Accessories / Hardware:
PowerPro™ Jet Rings Kit: #M952
3 x AccuPro™ Jet Rings Kit: #P556
Rotary Drain Kit, 26” Cable: #DA34
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(849) – Oil Rubbed Bronze
60"
60"
77-3/4"
3"
7.5"
34-9/16"
59-1/2" Ref.
Heater
Motor
12" H x 24" L
Service Access
Opt. Service Access
Blower
12" x 4"*
60"
25"
SIDE VIEW
END VIEW
2”
A
B
DRAIN/OVERFLOW
(51 mm)
(Inlet Heater)
(Motor)
(Blower)
(Inlet Heater)
(Motor)
(Blower)
MAX. 1"**
Product Shown: Bellavista™ Corner Salon™ Spa,
Model: DT20
* Measurements inside unit represent cutout in
floor to allow for drain/overflow.
Minimum Service Access dimensions given.
 previous