Jacuzzi BM85 Hot Tub User Manual


  Open as PDF
of 2
 
Fresco® Whirlpool Bath
Model: BM90, BM95
Fresco® Bath
Model: BM85
Installation Notes
Refer to installation instructions included with fi xture before beginning installation.
Please confi rm product availability and specifi cations before commencing with any
installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT TO CHANGE
WITHOUT NOTICE.
Electrical Components and Electrical Specifi cations do not apply to non-jetted baths.
Ordering Information
Product Code:
BM90 Fresco® Whirlpool Bath
Right Hand
BM95 Fresco® Whirlpool Bath
Left Hand
BM85 Fresco® Bath
• Center Drain Location
• Accessories / Hardware:
Trip-Lever Drain Kit: #X559
Rotary Drain Kit, 26” Cable: #8730
TheraPro™ Jet Rings Kit: #D095
AccuPro™ Jet Rings Kit: #P556
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(845) – Oil Rubbed Bronze
Technical Specifi cations
Dimensions
71-1/2” L x 42” W x 27-1/4” H
(1816 mm) L x (1067 mm) W x (692 mm) H
Drain/Overfl ow
A: 20-1/8” (511 mm) B: 11-3/4” (299 mm)
Cutout
Template Provided P/N: P188000
Total Weight
BM90, BM95: 921 lb (418 kg) / 44 lb/sq. ft. (216 kg/m
2
)
BM85: 896 lb (406 kg) / 43 lb/sq. ft. (210 kg/m
2
)
Operating Gallonage
63 U.S. Gal. (239 Liters)
Product Weight
BM90, BM95: 146 lb (66 kg)
BM85: 121 lb (55 kg)
Skirt Mounting
Not Available
Electrical Specifi cations Models BM90, BM95 only
Requires a dedicated GFCI protected separate circuit.
Motor/Pump: 120 VAC, 15 AMP, 60 Hz.
RapidHeat™: 120 VAC, 15 AMP, 60 Hz.
Heater (Optional) Models BM90, BM95 only
Requires a dedicated GFCI protected separate circuit.
RapidHeat™: P/N S750000
71-1/2"
42"
11-3/4"
2"
12" x 4"
Motor
12" H x 18" L
Service Access
4-1/2"
35-3/4"
© Jacuzzi Whirlpool Bath • 14880 Monte Vista Avenue • Chino • CA • 91710 • www.jacuzzi.com
SIDE VIEW
END VIEW
L
H
7-1/2"
(191 mm)
W
2"
(51 mm)
#FR42 07/07
DRAIN/OVERFLOW
A
B
Product Shown: Fresco® Whirlpool Bath Right Hand Shown Model: BM90
* Measurements inside unit represent cutout in fl oor to allow for drain/overfl ow.
Minimum Service Access dimensions given.
 previous