Jacuzzi B690 Hot Tub User Manual


  Open as PDF
of 2
 
Riva
®
6
WHIRLPOOL BATH
Technical Specifications
DIMENSIONS
72” L x 42” W x 20-1/2” H
(1829 mm) L x (1067 mm) W x (521 mm) H
DRAIN/OVERFLOW
A: 16” (406 mm) B: 11-1/2” (292 mm)
CUTOUT
Template Provided Part Number: P186000
TOTAL WEIGHT
B690, N274: 871 lb (395 kg) / 42 lb/sq. ft. (203 kg/m
2
)
B685: 840 lb (381 kg) / 40 lb/sq. ft. (195 kg/m
2
)
OPERATING GALLONAGE
62 U.S. Gal. (235 Liters)
Max. 77 U.S. Gal. (291 Liters)
PRODUCT WEIGHT
B690, N274: 105 lb (48 kg)
B685: 74 lb (34 kg)
SKIRT MOUNTING
Not Available
ELECTRICAL SPECIFICATIONS MODELS B690, N274 ONLY
Requires a dedicated GFCI protected separate circuit.
Motor/Pump: 120 VAC, 15 AMP, 60 Hz.
RapidHeat™: 120 VAC, 15 AMP, 60 Hz.
HEATER (OPTIONAL) MODELS B690, N274 ONLY
Requires a dedicated GFCI protected separate circuit.
RapidHeat™: P/N S750000
© 2008 Jacuzzi Whirlpool Bath • 14525 Monte Vista Avenue • Chino, CA 91710 • www.jacuzzi.com
INSTALLATION NOTES
Refer to installation instructions included with xture before
beginning installation. Please conrm product availability and
specications before commencing with any installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT
TO CHANGE WITHOUT NOTICE.
#FS07-000 05/08
N274
Riva™ 6 Whirlpool Bath, Right Hand
B690
Riva™ 6 Whirlpool Bath, Left Hand
B685
Riva™ 6 Bath
• Right and Left Hand Drain Location
• Accessories / Hardware:
4 XHTC Jet Trim Kit: #D095
2 X BMH Jet Trim Kit: #J869
Trip-Lever Drain Kit: #X559
Rotary Drain Kit, 26” Cable: #8730
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(849) – Oil Rubbed Bronze
Riva
®
6
SOAKER BATH
Electrical Components and Electrical Specifications do not apply
to non-jetted baths.
72"
21"
42"
2"
14" x 4"
11-1/2"
Motor
12" H x 18" L
Service Access
6-7/8"
SIDE VIEW
W
H
2''
L
END VIEW
DRAIN/OVERFLOW
A
B
Product Shown: Riva™ 6 Whirlpool Bath
Left Hand Shown Model: B690
* Measurements inside unit represent
cutout in floor to allow for drain/overflow.
Minimum Service Access dimensions given.
 previous