Jacuzzi 9235-RH Hot Tub User Manual


 
Nova™ 6 Whirlpool Bath
Model: 6800, 9235
Nova™ 6 Bath
Model: 7263
Installation Notes
Refer to installation instructions included with fixture before beginning installation.
Please confirm product availability and specifications before commencing with any
installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT TO CHANGE
WITHOUT NOTICE.
Electrical Components and Electrical Specifications do not apply to non-jetted baths.
Ordering Information
Product Code:
6800 Nova™ 6 Whirlpool Bath
Left Hand
9235 Nova™ 6 Whirlpool Bath
Right Hand
7263 Nova™ 6 Bath
• Left or Right Hand Drain Location
• Accessories / Hardware:
Trip-Lever Drain Kit #X559
Rotary Drain Kit, 26” Cable #8730
4 X HTC Jet Trim Kit: #D095
2 X BMH Jet Trim Kit: #J869
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(849) – Oil Rubbed Bronze
Technical Specifications
Dimensions
72” L x 42” W x 20-1/2” H
(1829 mm) L x (1067 mm) W x (521 mm) H
Drain/Overflow
A: 14-3/4” (375 mm) B: 8-1/2” (216 mm)
Cutout
70” x 40”
Total Weight
6800, 9235: 876 lb (397 kg) / 42 lb/sq. ft. (204 kg/m
2
)
7263: 847 lb (384 kg) 40 lb/ / sq. ft. (197 kg/m
2
)
Operating Gallonage
62 U.S. Gal. (235 Liters)
Max. 77 U.S. Gal. (291 Liters)
Product Weight
6800, 9235: 110 lb (50 kg)
7263: 81 lb (37 kg)
Skirt Mounting
Optional, U-Frame
Electrical Specifications Models 6800, 9235 only
Requires a dedicated GFCI protected separate circuit.
Motor/Pump: 120 VAC, 15 AMP, 60 Hz.
RapidHeat™: 120 VAC, 15 AMP, 60 Hz.
Heater (Optional Models 6800, 9235 only)
Requires a dedicated GFCI protected separate circuit.
RapidHeat™: P/N S750000
72''
21''
2''
2''
42''
14" x 4"*
10-7/8''
8-3/8''
Motor
12" H x 18" L
Service Access
Opt. Service Access
© Jacuzzi Whirlpool Bath • 14801 Quorum Drive • Dallas • Texas • 75254 • www.jacuzzi.com
END VIEW
H
W
SIDE VIEW
L
2"
#FR93 12/06
DRAIN/OVERFLOW
A
B
Product Shown: Nova™ 6 Whirlpool Bath Left Hand Model: 6800
* Measurements inside unit represent cutout in floor to allow for drain/overflow.