Allusion
®
6636
WHIRLPOOL BATH
Technical Specifications
DIMENSIONS
66” L x 36” W x 26” H
(1829 mm) L x (914 mm) W x (660 mm) H
DRAIN/OVERFLOW
A: 17-3/8” (441 mm) B: 11-15/16” (210 mm)
CUTOUT
Template provided Part Number BY20000
TOTAL WEIGHT
ED85: 843 lb (383 kg) / 51 lb/sq. ft. (249 kg/m
2
)
BA07: 771 lb (350 kg) / 47 lb/sq. ft. (228 kg/m
2
)
OPERATING GALLONAGE
65 U.S. Gal. (246 Liters)
Min. 55 U.S. Gal. (208 Liters)
Max. 75 U.S. Gal (284 Liters)
PRODUCT WEIGHT
ED85: 135 lb (61 kg)
BA07: 90 lb (41 kg)
SKIRT MOUNTING
Not Available
ELECTRICAL SPECIFICATIONS — Model ED85 only
Requires a dedicated GFCI protected separate circuit.
Motor/Pump: 120 VAC, 20 AMP, 60 Hz.
RapidHeat™: 120 VAC, 15 AMP, 60 Hz.
HEATER (STANDARD) — Model ED85 only
Requires a dedicated GFCI protected separate circuit.
RapidHeat™: P/N S750000
© 2007 Jacuzzi Whirlpool Bath • 14880 Monte Vista Avenue • Chino, CA 91710 • www.jacuzzi.com
INSTALLATION NOTES
Refer to installation instructions included with fixture before
beginning installation. Please confirm product availability and
specifications before commencing with any installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT
TO CHANGE WITHOUT NOTICE.
Product Shown: Allusion® 6636 Whirlpool
Bath Right Hand (ED85) Shown.
* Measurements inside unit represent cutout in
floor to allow for drain/overflow.
Minimum Service Access dimensions given.
#FR09000 10/07
ED85
Allusion® 6636 Whirlpool Bath
Right Hand Pump
BA07
Allusion® 6636 Bath
• Center Drain Location
• Accessories / Hardware:
HTC Jet Rings Kit: #D095
Rotary Drain Kit, 26” Cable: #8730
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(845) – Oil Rubbed Bronze
Allusion
®
6636
SOAKER BATH
66"
36"
11-15/16"
33"
5" x 5"*
8-1/2"
Motor
Opt. Service
Access
12" H x 18" L
Service Access
END VIEW
H
W
SIDE VIEW
L
4"
2"
ALLUSION
MAX 1"**
(Heater)
(Motor)
DRAIN/OVERFLOW
A
B
** See Install manual for installations instructions.