Filter
Top Products
20 iRobot Verro Owner’s Manual
Troubleshooting
(cont...)
Problem Likely cause What to do
Verro does
not cover the
entire pool
The filter bag needs to be
cleaned
The brushes, drive
belts or drive tracks
need replacing
The floating power cord
is preventing Verro
from reaching all parts
of the pool
The pump impeller is
fouled
Clean the filter bag. (p. 12)
Replace drive belts and treads. (p. 16)
Use the Detangler to untwist the floating power cord.
Position the Power Supply 12 feet away from the center
one of the long sides of the pool.
Ensure the floating power cord is not getting caught.
Consider repositioning the Power Supply to keep the
floating power cord away from objects on which it may
get caught.
Clean the impeller. (p. 18)
Verro gets
stuck on its
floating power
cord
The floating power cord is
twisted
Use Detangler to untwist the cord. (p. 17)