Filter
Top Products
6 INSPECTION AND TROUBLESHOOTING
Invacare® TheraPure™ Recessed Whirlpool Tubs
32 Part No. 1167458
6.2 Troubleshooting
If problems are not remedied, contact technical support at 1-800-668-2337, Extension 2.
SYMPTOMS FAULTS SOLUTION
Hydromassage System
System will not start No electrical power to tub Check and reset breaker
Switch air hose disconnected Reconnect hose to switch and controller
System is ineffective Water deposits in whirlpool jets Disassemble and clean whirlpool jets
System is noisy Whirlpool jets are turned on
without water completely
covering the jet assemblies
Turn off the whirlpool jets. Add water to the tub to completely cover the jet
assemblies and test the whirlpool function again.
Tub Operation
No water flow Water supply turned off Turn on water supply
Restricted water flow Water temperature control valve Inspect and clean the water temperature control valve. Refer to the Moen service
manual at www.moen.com. Search for Model 3371 ExactTemp Temperature Control
Valve, Service Manual Number 153768.