Filter
Top Products
Operation
4 Operation
4.1 Indicator lamps and audio signals
Possible I-Transia Functions
Status
Indicator
lamps
Audio
signals
Up Down Emergency
Lowering
Off-stand by Off
All OK Green
ü ü ü
Low battery Yellow
ü ü ü
Fault on hoist Yellow Beeps at
button
activation
ü
Battery critical
low
Yellow
ü ü
Over load Green
Beeps at
button
activation
ü ü
4.2 Operating the Hoist
The I-Transia is switched on automatically when a button on the hand control is
pressed.
The I-Transia will switch off automatically after approximately 8 minutes of
non-operation.
1. Press the UP button A on the hand control B to lift the patient.
2. Press the DOWN button C to lower the patient.
There must be a load on the lifting strap corresponding to the weight of the hanger
bar before I-Transia’s lowering function will operate.
1183377-B 13