Filter
Top Products
NOTE: At least once a year or before storage
lubricate the threaded shafts in the hub of the
mower pulleys as follows:
4. Lubricate the entire length of the threaded
shaft, the threads in the hub of the pulleys, the
outer surface of the hub and the brake insert with
I H 251 H EP grease or equivalent No.2 multi-
purpose lithium grease.
1. Pry off the spring cap retainer and cap using a
screw driver.
5. Reassemble in reverse order, making sure the
cap is 3/4 full of grease.
2. To detach hex. nut, place a large wood block
between the wing of the blade and the deck to
keep the blade from rotating. Then remove hex.
nut and washer.
6. Make sure belt shields do not rub on pulley
after reassembly.
3. Unscrew pulley from threads.
19