Filter
Top Products
108548_1208 3-1
SAFETY PRECAUTIONS
This safety alert symbol is used to call attention to a message
intended to provide a reasonable degree of PERSONAL
SAFETY for operators and other persons during the normal
operation and servicing of this equipment.
DANGER – denotes immediate hazards which WILL result
in severe personal injury or death.
WARNING – denotes a hazard or unsafe practice which
COULD result in severe personal injury or death.
This manual uses two other words to highlight information.
IMPORTANT calls attention to special mechanical information
and NOTE: emphasizes general information worthy of special
attention.
All operators and mechanics should read this manual, and be
instructed about safe operating and maintenance procedures. If
the operators or mechanics cannot read and understand English,
it is the owner’s responsibility to explain this material to them.
This machine meets or exceeds the CPSC 16 CFR PART
1205 Subpart A in effect at the time of production.
However, improper use or maintenance by the operator or
owner can result in injury. To reduce the potential for
injury, comply with these safety instructions and always pay
attention to the safety alert symbol, which means
DANGER or WARNING - “personal safety instructions.”
Failure to comply with the instructions may result in
personal injury or death.
Incorrect usage of this machine may result in severe
injury. Personnel operating and maintaining it should be
trained in the proper use and should read the manuals
completely and thoroughly before attempting to set-up,
operate, adjust, or service this machine.
It is the owner’s responsibility to make certain that the
operators and mechanics read and understand this manual and
all decals before operating this machine. It is also the owner’s
responsibility to make certain that the operators and mechanics
are qualified and physically able individuals, properly trained in
the operation of this equipment. All operators and mechanics
must become familiar with the safe operation of the equipment,
operator controls and safety signs.
Never let children or untrained people operate or service the
equipment. Local regulations may restrict the age of the
operator.
The owner/user can prevent and is responsible accidents or
injuries occurring to themselves, other people or property.
The owner should also ensure that the operator/mechanic
know that they are responsible for their own safety as well as the
safety of other persons within the vicinity. Remember, the
operator is responsible for accidents or hazards occurring to
other people or their property.
Safety and Instruction Decals
Specific safety warning decals are located on the equipment near the immediate areas of potential hazards. These decals should
not be removed or obliterated. Replace the decals if they become non-readable.
The following illustrations show the various decals that are located on the machine. A brief explanation is shown to help the operator
understand the meanings of these decals.
• Read Owner’s Manual and Quick Reference Decal before
attempting to operate this machine.
• Whirling blades! Keep hands and feet away.
Choke
Fast
Slow
Stop
Blade
lever
Drive
clutch
lever
Throttle
lever
Slow
Fast
Gearshift
lever