Filter
Top Products
766238 6/07 9-3
Front Engine Assembly - 4600
NOTES:
1. Torque to 25-27 ft. lbs.
2. Torque to 70 ft. lbs. Check with torque wrench.
3. Apply anti seize compound 006395 to pulley ID & pump shaft.
4. Torque to 40 ft. lbs.
5. Do not tighten engine pulley until it is aligned with pump pulley.
6. Pump pulley must align with pulley on engine within
+
.06 inch.
7. Packaged in bolt sack 391235, 1 each.
8. To adjust belt tension compress clutch spring 1 inch
+
1/8.
9. Before assembly of item 24, stub shaft, to engine fly wheel, clean both
surfaces with solvent to remove any wax or dirt.
INDEX
NO.
SERVICE
PART NO.
MFG. PART
NO.
QTY. DESCRIPTION
1 056325 056325 1 CB .25-20 X 1.00 FUL ZN
2 299479 299479 1 DRIVE SHAFT HANGER
3 017038 017038 3 LW .250 MEDIUM SPRING ZN
4 024927 024927 1 NT .25-20 HX G5 ZN
5 089755 089755 1 HOSE .625 O.D. X .375 I.D. X 1.65”
6 017921 017921 1 NT .312-18 HX ZN
7 017004 017004 5 LW .312 MEDIUM SPRING ZN
8 064345 064345 1 CS .312-18 X 2.00 HX ZN
9 030692 030692 1 DRIVE SHAFT, P.T.O.
073759 N/A 1 U-JOINT REPAIR KIT
10 015495 N/A 1 GREASE ZERK
11 015610 015610 1 CAP PLUG
12 036236 036236 4 CS .312-18 X 1.00 HX G5 ZN
13 362954 362954 1 CLUTCH SHROUD
14 022285 022285 1 ELECTRIC CLUTCH ASSEMBLY
15 715623 N/A 1 CS .312-24 X 2.750 HX NY LK
16 715649 N/A 1 FW .330 X 1.50 X .240
17 386359 386359 1 CLUTCH ANCHOR
18 055947 055947 2 CS .25-20 X .50 HX G5 ZN
19 073304 073304 1 Q.D. HUB
20 034942 034942 1 Q.D. SHEAVE (6.35” O.D.)
21 038638 038638 3 CS M10-1.25 X 25 HX G8 BO
22 035238 035238 3 LW .437 MEDIUM SPRING ZN
23 015719 015719 1 WOODRUFF KEY
24 030627 030627 1 STUB SHAFT
25 081752 081752 1 WOODRUFF KEY
26 717595 N/A 1 WOODRUFF KEY
27 524272 524272 1 PUMP DRIVE PULLEY 8” O.D.
28 033779 033779 1 V-BELT (PUMP DRIVE)
29 017061 017061 1 LW .750 MEDIUM SPRING ZN
30 036855 036855 1 NT .75-16 HX ZN