Husqvarna Z 46" Lawn Mower User Manual


  Open as PDF
of 17
 
7
UNPACKING INSTRUCTIONS
• Removeallpartsandpackingmaterialsfrom
carton.
Checkcartoncontentsagainstlist.Besureall•
parts are there.
TOOLS REQUIRED
• ½"Wrench(2) •
9
/16"Wrench(2)
•
7
/16"Wrench(2) • Ft/Lbs Torque Wrench
•
9
/16"SocketandRatchet
• Standard Screwdriver
PARTS IDENTIFICATION
NOTE:Whenrighthand(RH)andlefthand(LH.)are
mentionedinthismanual,itmeanswhenseatedonthe
mowerintheoperator’sposition.
CONTAINER CONTENTS
2 - Soft bag containers 1 - Bag of Hardware
1 - Hose 1 - Inlet
1 - Lower chute 1 - Cover Assembly
2 - High Lift Blades
COVER ASSEMBLY
BAG CONTAINERS
HOSE
LOWER CHUTE
BEFORE ASSEMBLING GRASS CATCHER TO MOWER
Place motion control levers in “NEUTRAL” position.•
Set parking brake.•
Turn ignition key “OFF” and remove key.•
Make sure the blades and all moving parts have completely stopped.•
Disconnect spark plug and place wire where it cannot come in contact with plug.•
WARNING
 previous next