10
ASSEMBLY
5
CONTAINER INSTALLATION
Install containers on support frame, overlapping 1.
containers at center tube.
Note: One container should always overlap the
other container at the center tube.
Closecoverandlocklatchhandleoversupport2.
tubes.
DO NOT operate mower unless container is
properly installed. Container is subject to
wear and deterioration, check containers
frequently, replace when cracked or damaged.
Use only a recommended replacement
container.
WARNING
1. Raiseandholddeectorshieldinuprightposition.
2. Fitlowerchuteasshownandhookrearlatchto
mowerdeck.
3. Alignthebracketslotonlowerchutewiththe
deectorbrackettabonthemowerdeck.Slide
chute down over tab.
4. With the lower chute in proper position, hold the
chutesecurelywhilehookingthefrontlatchtothe
mowerdeck.
NOTE: Whilehookingthelatches,thedeector
shieldmaytrytopushthechuteawayfromthe
mowerdeckopening.Itisimportanttoholdthe
chuteinpositionwhilehookingthelatchesto
themowerdeck.
6
LOWER CHUTE INSTALLATION
Support Frame
Latch Handle
Deector
Shield
Deector
Bracket
Tab
Rear Latch
Attach Rear Latch
here
Front Latch