Filter
Top Products
English-20
CONTROLS
7. Ignition Switch
The ignition key is placed on the driver’s
panel and is used to start and stop the
engine.
8. Choke Control
The choke mode is used for cold starts in order
to provide the engine with a richer fuel mixture.
The Throttle control is equipped with a choke
detent. Pressing the throttle control all of the
way forward will choke the engine. For full
throttle, press throttle control forward until
you feel the choke detent.
9. Throttle Control
The throttle control regulates the engine
speed and thereby the rate of rotation of the
blades, assuming the blade switch is pulled
out, see Engaging the Mower Deck.
In order to increase or decrease the engine
speed, the control is moved.
Avoid idling the engine for long periods, as
there is a risk of fouling the spark plug.
USE FULL THROTTLE WHEN MOWING, for
best mower performance and battery
charging.
8011-748
Ignition key and hour meter
IMPORTANT INFORMATION
Do not run the starter for more than five
seconds each time. If the engine does not
start, wait about 10 seconds before re-
trying.
8011-480
Choke control detent
8011-747
Throttle control