Filter
Top Products
7
SETUP AND ADJUSTMENTS
GROUND SPEED LEVER FRICTION
bolt and tracking knob will need to be turned in
the appropriate direction until the tires stop.
Move ground speed lever to the fast position
and back to stop. Verify that the tires stop. Ad-
just if necessary. Tighten jam nut on the track-
ing bolt. With the ground speed lever to the rear,
turn the ground speed stop bolt until it just con-
tacts the bottom of the ground speed lever. See
Figure 3. Tighten jam nut on ground speed stop
bolt. Reverify that all the tires stop with the ground
speed lever and the neutral lock bail.
The ground speed lever has friction washers to
adjust the tension of the lever. To adjust, use
two 9/16” wrenches and tighten or loosen the
bolt and nut on each side of the friction plates.
See Figure 4.
FIGURE 4
GROUND
SPEED
ADJUSTMENT
BOLT
FIGURE 3
TRACKING
KNOB
TRACKING
BOLT
GROUND
SPEED
ADJUSTMENT
BOLT
GROUND
SPEED
LEVER
FRICTION
PLATE