Filter
Top Products
English-26
OPERATION
8. Holding down at least one of the operator
presence levers, engage blades and set
RPM to maximum.
9. Release the neutral bail.
10. Set the ground speed lever to the
desired position.
Driving forward
1. Pull the ground speed lever fully back.
2. Depress one operator presence lever.
3. Unlock the motion control levers by
pushing the neutral bail down out of the
neutral slots.
4. Slowly set the ground speed lever to the
desired position and release both motion
control levers at the same time to begin a
straight line forward motion.
5. The steering system of this mower uses
individual right and left motion control levers on
the handle bars. Squeezing one motion control
lever will reduce the flow of oil from the hydro
pump to its wheel motor. The speed of the
wheel is reduced. With the both wheels still
under power, a turn is accomplished.
6. To stop forward travel, pull both levers back into
their stop positions or pull the ground speed
lever fully back.
8011-661
P
resence lever
8011-654
G
round speed lever
8011-403
1. Operator Presence Lever
2. Motion Control Lever
3. Neutral Bail
4. Handle
E-handle with bail in neutral position