Filter
Top Products
English – 37
TECHNICAL DATA
Bar and chain combinations
The following combinations are CE approved.
Saw chain filing and file gauges
EC-declaration of conformity
(Applies to Europe only)
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel +46-36-146500, declares under sole responsibility that the chain
saw Husqvarna T425 from 2007’s serial numbers and onwards (the year is clearly stated in plain text on the type plate
with subsequent serial number), is in conformity with the requirements of the COUNCIL’S DIRECTIVES:
- of June 22, 1998 ”relating to machinery” 98/37/EC, annex IIA.
- of December 15, 2004 ”relating to electromagnetic compatibility” 2004/108/EC.
- of May 8, 2000 ”relating to the noise emissions in the environment” 2000/14/EC.
For information relating to noise emissions, see the chapter Technical data. The following standards have been applied:
CISPR 12:1997, EN ISO 11681-2.
Notified body: TÜV Rheinland InterCert kft. Production Certification - H-1061, Budapest, Paulay Eden, 52 Hungary, has
carried out EC type examination in accordance with the machinery directive’s (98/37/EC) article 8, point 2c. The
certificates for EC type examination in accordance with annex VI, have the numbers: U3 2892008 01
The supplied chain saw conforms to the example that underwent EC type examination.
Huskvarna January 21, 2008
Bengt Frögelius, Development director chainsaw R
Bar Chain
Length, inch Pitch, inch Gauge, mm Max. nose radius Type Length, drive links (no.)
10 1/4 1,3 R10 Husqvarna H00 60
10 3/8 1,3 7 T Husqvarna H36 40