Filter
Top Products
27
REPAIR PARTS SNOW THROWER - - MODEL NUMBER ST 121E (96183000100)
SHROUD ASSEMBLY
NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm
IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts.
Failure to do so could be hazardous, damage your snow thrower and void your warranty.
KEY PART
NO. NO. QTY DESCRIPTION
1 532 44 34-26 1 COVER.NON-DRIVE.SIDE.MS428
2 532 44 39-73 1 COVER.DRIVE.SIDE.MS428
3 532 44 34-28 1 TOP.COVER
4 532 43 02-20 1 CAP.ASM.FUEL.2.25"FR.N/CB.E10
5 532 43 62-35 1 BULB.PRIMER
6 532 43 54-07 1 KEY HOUSING
7 532 44 34-29 1 TOP.REAR.COVER
8 532 43 76-31 1 PLATE.EXHAUST.PNT.
9 817 41 13-12 2 SCREW.HI-LO
10 532 44 22-50 12 TORX.1/4-20X3/4.SCREW
11 532 43 48-80 1 TANK.FUEL.ASM
12 532 14 68-48 2 TIE.CABLE.24.5X.29.NYLON.WHITE
13 532 44 34-24 1 COVER.REAR.LOWER
14 532 44 30-69 2 KEY
15 532 43 48-68 3 CLIP
16 532 19 66-88 3 CLIP
17 532 44 30-70 1 HANDLE.STARTER