2
IDENTIFICATION (WHAT IS WHAT?)
1
4
5
6
7
8
9
10
11
12
13
1415
1617
18
19
20
21
22
2423
1. Cylinder Cover
2. Front Handle
3. Front Hand Guard
4. Starter Cover
5. Chain Oil Tank
6. Starter Handle
7. Carburetor Adjusting Screw
8. Choke Control
9. Rear Handle
10. ON/STOP Switch
11. Fuel Tank
12. Muffler
13. Bar Tip Sprocket
14. Saw Chain
15. Saw Bar
16. Chain Catcher
17. Chain Brake Assembly
18. Rear Hand Guard
19. Throttle Control/Trigger
20. Throttle Lock
21. Bar/Chain Adjustment Tool
22. Chain Tensioning S crew
23. Instruction Manual
24. Guide Bar Cover
321
IDENTIFICATION OF SYMBOLS
W ARNING! This chai n
saw can be dangerous! Care-
less or improper use can cause
serious or even fatal injury.
Read and understand the
instruction manual before
using the chain saw.
Always use two hands when operating the chain saw.
WARNING! Contacting the guide b ar tip with any object
should be avoided; tip contact may cause the guide bar to
move suddenly upwardandbackward, whichmay cause se-
rious injury .
Always wearappropriate earprotection, eye protectionand headprotection.
XX_
Measured maximum kickback value without chain brake for the bar
and chain combination on the label.