Filter
Top Products
Engine Frame
Manufacturer Briggs & Stratton Cutting Width 52" (133 cm)
Type Endurance Commercial Cutting Height 1½"-4½" (3.8-11.4 cm)
Power
26 HP
1)
Uncut Circle 0
Lubrication Pressure with oil filter Number of Blades 3
Fuel Min 87 octane unleaded (Max
ethanol 10%, Max MTBE 15%)
Blade Length 18" / 46 cm
Fuel tank capacity 5 gallons / 18.8 liters Nose Roller Yes
Cooling Air cooled Sprung Seat Premium Commercial EVC
Air filter Cyclonic Hinged Arm Rests Yes
Alternator 12v 15 amp @ 3600 rpm Service Minder Digital
Starter Electric Blade Engagement 200 ft-lb Ogura
Transmission
Deck Construction 11 gauge
Transmission Hydrostatic transaxles Productivity 4.2 acres/h / 16,997 m
2
/h
Steering control Dual levers, foam gripped
Dimensions
Speed forward 0-10 mph - 0-16.1 Km/h Weight 760 lbs / 344 kg
Speed reverse 0-5 mph - 0-8 Km/h Base Machine Length 75½" / 192 cm
Brakes Mechanical Base Machine Height 42" / 107 cm
Front caster tires 13 x 6.5 - 6 Base Machine Width 49" / 125 cm
Rear tires, turf pneumatic 23 x 10.5-12 Overall Width, Chute Up 53¼" / 135 cm
Tire pressure 15 PSI / 103 kPa / 1 bar Overall Width, Chute Down 67" / 170 cm
Overall Height, ROPS Up 72½" / 184 cm
1)
The power rating as declared by the engine
manufacturer is the average gross power output at
the specified RPM of a typical production engine for
the engine model measured using SAE Standards for
engine gross power. Refer to the engine manufacturer
engine specifications.
34
TECHNICAL DATA