Filter
Top Products
53
TECHNICAL DATA
1)
See the Engine Manufacturer's manual
for engine specifications.
2)
The power rating of the engines
indicated is the average net power output
(at specified rpm) of a typical production
engine for the engine model measured
to SAE standard J1349/ISO1585. Mass
production engines may differ from this
value. Actual power output for the engine
installed in the final machine will depend
on the operating speed, environmental
conditions and other variables.
MZ6128 / 966613103
Engine
Manufacturer Briggs & Stratton
1)
Type Endurance
Power 28 HP
2)
Lubrication Pressure w/ Oil Filter
Fuel Min 87 octane unleaded (Max ethyl alco-
hol 10%, Max MTBE 15%)
Fuel tanks capacity 5 gallons / 9 liters
Cooling Air cooled
Alternator 12v 15 amp @ 3600 rpm
Starter Electric
Transmission
Transmission ZT-3100 Hydro Gear
Speed and direction controls Dual levers, foam gripped
Speed forward 0-8.5 mph - 0-13.7Km/h
Speed reverse 0-4 mph - 0-6.4 Km/h
Brakes Mechanical parking brake
Front caster tires, smooth tread 13 x 6.5-6
Rear tires, turf pneumatic 22 x 10-10 4 ply
Tire pressures 15 PSI / 103 kPa / 1 bar
Frame
Cutting Width 61" (155 cm)
Cutting Height 1½"-4½" (3.8-11.4 cm)
Uncut Circle 0
Number of Blades 3
Blade Length 21" / 46 cm
Nose Roller Yes
Sprung Seat Suspension
Hinged Arm Rests Yes
Hour Meter Yes
Blade Engagement 200 ft-lb Warner Clutch
Deck Construction 11 gauge fabricated
Productivity 4.2 acres/h / 16,997 m2/h
Dimension
Weight 770 lbs / 349 kg
Base Machine Length 75½" / 192 cm
Base Machine Height 42" / 107 cm
Base Machine Width 49" / 125 cm
Overall Width, Chute Up 62½" / 158 cm
Overall Width, Chute Down 76" / 193 cm