Filter
Top Products
54
TECHNICAL DATA
Engine
Manufacturer
Briggs & Stratton
Type
Endurance
Power 27 HP
1)
Lubrication Pressure w/ Oil Filter
Fuel Min 87 octane unleaded (Max ethyl
alcohol 10%, Max MTBE 15%)
Fuel tanks capacity 5 gallons / 18.9 liters
Cooling Air cooled
Alternator 12v 15 amp @ 3600 rpm
Starter Electric
Transmission
Transmission ZT-3100 Hydro Gear
Speed and direction controls Dual levers, foam gripped
Speed forward 0-8.5 mph - 0-13.7Km/h
Speed reverse 0-4 mph - 0-6.4 Km/h
Brakes Mechanical parking brake
Front caster tires, smooth tread 13 x 5-6
Rear tires, turf pneumatic 22 x 10-10
Tire pressures 15 PSI / 103 kPa / 1 bar
Frame
Cutting Width 61" (155 cm)
Cutting Height 1½"-4½" (3.8-11.4 cm)
Uncut Circle 0
Number of Blades 3
Blade Length 18" / 46 cm
Nose Roller Yes
Sprung Seat Suspension
Hinged Arm Rests Yes
Service Minder Digital
Blade Engagement Warner 200 ft-lb Clutch
Deck Construction 11 gauge fabricated
Productivity 4.2 acres/h / 16,997 m2/h
Dimension
Weight 770 lbs / 349 kg
Base Machine Length 75½" / 192 cm
Base Machine Height 42" / 107 cm
Base Machine Width 49" / 125 cm
Overall Width, Chute Up 62½" / 158 cm
Overall Width, Chute Down 76" / 193 cm
1)
The power rating as declared by the
engine manufacturer is the average gross
power output at the specified RPM of a
typical production engine for the engine
model measured using SAE Standards for
engine gross power. Refer to the engine
manufacturer engine specifications.