Filter
Top Products
28
OPERATION
8. Press in and turn the ignition key to the start
position.
8058-216
Set the throttle
8050-780
Turn to the start position
8050-781
Return to run position
9. When the engine starts, immediately release the
ignition key back to the run position.
10. Slowly push in the choke control knob, if it was
used to start a cold engine.
IMPORTANT INFORMATION
Do not run the starter for more than 5 seconds
each time. If the engine does not start, wait
about 10 seconds before retrying.
11. Set the engine speed with the throttle. Allow the
engine to run at a moderate speed, approximately
mid throttle, for 3-5 minutes before loading it too
heavily. USE FULL THROTTLE WHEN MOWING
(no choke).
WARNING! Engine exhaust and certain
vehicle components contain or emit chemicals
considered to cause cancer, birth defects or
other reproductive system damage. The engine
exhaust contains carbon monoxide, which is
an odorless, colorless, poisonous gas. Do not
use the machine in enclosed spaces.