Filter
Top Products
7
LOWER CHUTE (See Fig. 5)
• Raise and hold deflector shield in upright position.
• Place slot in lower chute over tab on mower deck and
position lower chute over deck opening as shown.
• Hook rear latch into flange hole on back of mower deck.
• Hook front latch into tab hole on front of mower deck.
5
CAUTION: Do not remove deflector
shield from mower. Raise and hold
shield when attaching lower chute and
allow it to rest on chute while in
operation.
REAR LATCH
FRONT
LATCH
DEFLECTOR
SHIELD
FIG. 5
UPPER CHUTE (See Figs. 6A & 6B)
• Lower mower deck to its lowest cutting position.
• Assemble upper chute by inserting curved end into hole
in back of cover.
NOTE: Handle carefully so as not to damage dump bag
indicator.
• Push in and turn upper chute until it is in line with lower
chute.
• Align the bosses on lower chute with alignment slots on
upper chute and slide together.
• Secure with rubber latch by hooking hole in latch over
latch pin.
6
COVER
HANDLE
LOWER
CHUTE
DUMP BAG
INDICATOR
UPPER
CHUTE
FIG. 6B
FIG. 6A
BOSSES
LATCH PIN
ALIGNMENT
SLOT
RUBBER
LATCH
LEVEL MOWER DECK
• Be sure deck is properly leveled for best mower perfor-
mance. See your tractors owner's manual for instruc-
tions
7
TAB
OPTIONAL FRONT
GAUGE WHEEL
ASSEMBLY