Filter
Top Products
13
Edger-trimmers stored for any length of time should be completely drained of fuel to prevent
gum deposits forming on essential parts such as the carburetor and fuel tank. Such deposits
may aect the operation of the engine when used again. Therefore, it is important that the
following instructions be adhered to before starting engine. 1. Drain fuel tank completely. 2.
Operate the engine until it stops from lack of fuel, to clean all gasoline out of carburetor. 3.
While engine is still warm, drain the crank case. Rell with fresh oil. 4. Remove spark plug, and
pour one ounce of oil into the cylinder. Pull starter rope on the engine to spread the oil. Replace
spark plug. 5. Clean dirt and cha from cylinder and cylinder head ns, blower housing, etc.
MAINTENANCE NOTES
STORAGE INSTRUCTIONS