Filter
Top Products
English-59
LUBRICATION
9. Belt Adjuster, Mower Deck
Remove the foot plate (two screws) and
lubricate with a grease gun, one zerk, until
grease is forced out.
Use only good quality molybdenum
disulphide grease.
Grease from well-known brand names
(petrochemical companies, etc.) usually
maintains a good quality.
10. Steering Control Shafts
Tip the driver’s seat.
Lubricate with a grease gun, one zerk for
each steering control shaft, until the grease is
forced out.
Use only good quality molybdenum
disulphide grease.
Grease from well-known brand names
(petrochemical companies, etc.) usually
maintains a good quality.
11. Mower Deck Struts
Lubricate with a grease gun, one zerk for
each strut, until the grease is forced out.
Use only good quality molybdenum
disulphide grease.
Grease from well-known brand names
(petrochemical companies, etc.) usually
maintains a good quality.
8011-576
The belt adjuster grease zerk
IMPORTANT INFORMATION
Use minimal lubrication and remove excess
lubricant so that it does not come into
contact with belts or belt pulley drive
surfaces.
8011-578
Lubricating the steering control shafts
8011-577
Lubricating struts